Loading branch status…
Home / Power Tools / 1600W Electric Wood Router Machine (Plunge Router) – 2 Pcs per Carton
1600W Electric Wood Router Machine (Plunge Router) – 2 Pcs per Carton
Jadever · Model JDER1516001

1600W Electric Wood Router Machine (Plunge Router) – 2 Pcs per Carton

KSH 9,500/ piece
In stock
About this product

Power Tools › Wood Routers

1600W Electric Wood Router Machine (Plunge Router) – 2 Pcs per Carton

A powerful plunge router for cabinet makers, carpenters and joinery workshops in Kenya.

1600 Watts 22,000 rpm 0–60 mm plunge depth Takes 1/2″ and 12 mm bits

Product Overview

This 1600W electric wood router machine is a heavy-duty plunge router built for shaping edges, cutting grooves and making joints in wood and board. Its 1600 watt motor spins the cutter at 22,000 rpm, giving a clean finish on MDF, plywood, blockboard, chipboard and solid timber.

The router accepts five shank sizes, from small 6 mm trimming bits up to large 1/2 inch and 12 mm profile cutters, so one machine covers kitchen cabinets, wardrobes, doors, frames and decorative mouldings. It is supplied in a carton of 2 pieces, which suits workshops, contractors and hardware resellers.

Technical Specifications

Product typeCorded electric plunge router for wood
Input power1600 W
Rated voltage220–240 V ~ 50/60 Hz (Kenya mains)
No-load speed22,000 rpm
Plunge depth0–60 mm
Collet sizes6 mm, 8 mm, 12 mm, 1/4″ and 1/2″
Base typePlunge base with twin side handles and depth stop
Guides includedStraight guide, trimming guide, template guide and guide holder
Power sourceMains electric, corded
Suitable materialsSoftwood, hardwood, MDF, plywood, marine plywood, blockboard, chipboard, laminated board
Carton packing2 pieces per carton

Key Features

  • Strong 1600W motor that keeps cutting through hardwood and thick board without stalling.
  • 22,000 rpm cutter speed for smooth edges that need little sanding.
  • Plunge action up to 60 mm so you can start a cut in the middle of a panel, not only from the edge.
  • Five collet sizes that fit almost every router bit sold in Kenya, metric and imperial.
  • Adjustable depth stop for repeating the same groove depth on many pieces.
  • Two side handles for firm, balanced control with both hands.
  • Guides in the box for straight grooves, edge trimming and template work.

Where to Use It

  • Kitchen cabinets, wardrobes and TV units: grooves for back panels, shelf housings and hinge recesses.
  • Doors and frames: lock and hinge mortises, rebates and decorative edges.
  • Furniture making: round-over, ogee, chamfer and bead profiles on table tops and shelves.
  • Joinery: dado, rabbet, mortise and dovetail joints.
  • Trimming edge banding and laminate flush with the board.
  • Sign making and template copying in wood and board.

Where Not to Use It

  • Not for metal, stone, tiles, concrete or glass.
  • Not for wet timber or outdoor use in rain.
  • Not for very large diameter cutters at full depth in one pass. Cut in shallow steps instead.
  • Not a WiFi or internet router. This is a woodworking power tool.

How to Use the Electric Wood Router

  1. Unplug the machine. Always fit or change a bit with the plug out of the socket.
  2. Choose the collet that matches your router bit shank exactly, for example the 1/2″ collet for a 1/2″ shank.
  3. Insert the bit at least three quarters of the shank length into the collet, then tighten the collet nut firmly with the spanner while holding the spindle lock.
  4. Set the cutting depth. Rest the router on the workpiece, lower the bit until it touches the surface, then set the depth stop to the depth you want.
  5. Fit a guide if needed: the straight guide for grooves parallel to an edge, or the template guide for copying a pattern.
  6. Clamp the workpiece firmly to the bench so it cannot move.
  7. Put on safety glasses, ear protection and a dust mask.
  8. Start the motor with the bit clear of the wood and let it reach full speed.
  9. Plunge and lock the router at depth, then move it steadily. On an outside edge, move from left to right so the cutter turns against the feed direction.
  10. Cut deep grooves in steps of about 3 to 6 mm per pass rather than all at once.
  11. Release the plunge so the bit lifts out of the wood, switch off and wait for the bit to stop before putting the router down.

Tip: A burning smell or dark marks on the wood means the feed is too slow or the bit is blunt. Move a little faster or change to a sharp bit.

Depth Guide: A Worked Example

To cut a groove 12 mm deep for a cabinet back panel in 18 mm board, do not cut the full depth in one go. Set the depth stop to 4 mm for the first pass, 8 mm for the second and 12 mm for the third. Three light passes give a cleaner groove, protect the bit and keep the motor cool.

Works Well With These Products From Our Stock

  • MDF, blockboard and laminated boards for cabinets.
  • Marine plywood, available wholesale.
  • Edge banding in matching colours.
  • Cabinet hinges, runners and other cabinetry fittings.
  • Wood glue, sealants and adhesives.

Safety and Care

  • Keep both hands on the handles while the motor is running.
  • Never start the router with the bit touching the wood.
  • Keep the power cable behind you and away from the cutter.
  • Use only sharp, undamaged router bits rated for at least 22,000 rpm.
  • Blow dust out of the motor vents after each day of work.
  • Check the carbon brushes from time to time and replace them when worn.
  • Store the machine in a dry place, away from children.

Important: Read the instruction manual in the carton before first use.

Frequently Asked Questions

What size router bits fit this 1600W wood router?

It takes bits with 6 mm, 8 mm, 12 mm, 1/4″ and 1/2″ shanks. Always match the collet to the shank size exactly.

Can this router machine cut MDF, plywood and hardwood?

Yes. The 1600W motor handles MDF, chipboard, plywood, blockboard, softwood and hardwood. Take deep cuts in several shallow passes.

Is this an internet or WiFi router?

No. This is a woodworking power tool used by carpenters and cabinet makers to cut grooves, shape edges and make joints.

Where can I buy a wood router machine in Ongata Rongai or Tuala?

At Shabbiri Hardware on Magadi Road: the Ongata Rongai branch opposite Hashi Petrol Station and the Tuala branch past Nazarene University.

Do you deliver the router outside Nairobi?

Yes. Delivery is arranged by location, with boda delivery nearby and courier for upcountry orders. Delivery is charged separately.

Availability and Delivery

The 1600W electric wood router machine is available at both Shabbiri Hardware branches. We are a supply-only hardware: we sell the machine and materials, and can share contacts of independent fundis if you need one.

Ongata Rongai Branch

Magadi Road, opposite Hashi Petrol Station, Ongata Rongai.

Open Ongata Rongai branch in Google Maps

Tuala Branch

Magadi Road, Tuala, past Nazarene University.

Open Tuala branch in Google Maps

Enquire or Order

Shabbiri Hardware Kenya Limited · Serving builders and carpenters since 1990 · Magadi Road, Ongata Rongai and Tuala

KSH 9,500/ piece
In stock
Delivery on request — same-day within Nairobi, next-day countrywide.
Free pickupat Rongai & Tuala branches.
Qty
1
📲 Order on WhatsApp
100% genuine, sourced materials
Secure M-Pesa & card payment
Countrywide delivery arranged
100% Genuine
No fakes, ever
Quality assured
Trusted brands only
Countrywide delivery
Arranged on request
Expert advice
Sales team on WhatsApp

Specifications

BrandJadever
ModelJDER1516001
CategoryPower Tools
AvailabilityIn stock
Sourced byShabbiri Hardware Kenya Limited

Customer reviews

No reviews yet — be the first to review this product.

Frequently bought together

Customers who bought this often add these to their order.