Akfix EM600 Waterguard Acrylic Waterproofing Membrane 20Kg
Akfix EM600 Waterguard Acrylic Waterproofing Membrane – 20Kg
Stop roof leaks before the rains start. A one-component, water-based acrylic waterproofing membrane that cures into a seamless, elastic, UV-resistant waterproof layer over roofs, terraces, balconies and facades. Trusted across Kenya — ready to use straight from the bucket, applied by brush, roller or airless spray. Available now at Shabbiri Hardware, Magadi Road Ongata Rongai & Tuala (past Nazarene University) at competitive prices, with free expert application advice.
Why Choose Akfix EM600 Waterguard Waterproofing Membrane?
🛡️ Seamless, Joint-Free Protection
Forms one continuous elastic membrane with no overlaps or weak points where leaks start.
🪣 Ready To Use
No mixing, no torching, no special equipment. Apply with brush, roller or airless spray and cut labour costs.
🧵 Highly Elastic (≥600% Elongation)
Bridges hairline cracks and moves with the structure without tearing, even in cold weather.
☀️ UV Resistant
Withstands the harsh Kenyan sun without degrading — ideal for exposed roofs and terraces.
💨 Breathable (Vapor Permeable)
Lets trapped moisture escape so the coating doesn't blister or peel.
🌿 Water-Based & Solvent-Free
Low odour, safe and easy to work with; tools clean up with water.
🎨 High Opacity & Overpaintable
Excellent coverage — can be painted over or tinted with water-based colorants.
Where to Use Akfix EM600 (Application Areas)
- 🏠 Flat, pitched roofs & roof terraces
- 🏢 Balconies & verandas
- 🧱 Facades & parapet walls
- 🔩 Metal (mabati) & wooden roofs
- 🛢️ Over old asphalt & bitumen coatings
- 🌧️ Gutters, chimney edges, skylights & flashings
Akfix EM600 Technical Specifications
| Property | Value |
|---|---|
| Chemical base | Acrylic copolymer (one-component, water-based) |
| Colour | Grey (also produced in white) |
| Density | 1.37 ± 0.03 g/ml |
| Solid content | 70–80% |
| Viscosity | 50,000 ± 5,000 cP (Spindle No. 6, 12 rpm, 20°C) |
| Tensile strength | > 1 N/mm² |
| Elongation at break | ≥ 600% |
| Recoat / drying time | 4–5 hours (23°C, 50% R.H.) |
| Full service time | 48 hours (23°C, 50% R.H.) |
| Recommended dry film thickness | Approx. 1 mm |
| Consumption | 1.0–1.5 kg/m² (horizontal); approx. 0.75 kg/m² (vertical) |
| Application temperature | +5°C to +35°C |
| Application methods | Brush, roller or airless spray |
| Packaging | 20 kg plastic pail (5 kg available on order) |
| Shelf life | 12 months unopened, stored at +5°C to +25°C, dry, away from direct sunlight |
How to Use Akfix EM600 Waterguard (Application Instructions)
Surface Preparation
The surface must be sound, clean, dry and free from dust, oil, grease, moss and loose particles. Repair large cracks and holes with a suitable repair mortar. On metal roofs, treat any rust and apply an anti-corrosive primer first.
Priming (Porous Surfaces)
For concrete, screed and other absorbent surfaces, dilute EM600 with water (approx. 1 part membrane to 1–2 parts water; highly porous surfaces may need up to 4–5 parts water) and apply evenly. Let the primer dry.
First Coat
Apply undiluted EM600 in one uniform direction using a brush, roller or airless spray gun.
Second / Third Coat
After 4–5 hours (once dry to touch), apply the next coat in the opposite (perpendicular) direction. Apply a minimum of 2 coats, building a total dry film of about 1 mm.
Reinforcement (Critical Details)
On wall-floor junctions, corners, drains, cracks and joints, embed a reinforcement fabric/geotextile into the wet first coat, then cover fully with subsequent coats.
Curing & Protection
Protect the fresh membrane from rain, frost and dew for at least 24 hours. The system reaches service condition in about 48 hours.
- Do not apply during rain, when rain is expected within 24 hours, or when there is a risk of frost.
- Not suitable for areas under permanent/pressurized water (e.g. water tanks, pools).
- Not designed for direct pedestrian or vehicle traffic — protect with tiles, screed or a wear layer if walked on regularly.
- Clean tools with water immediately after use.
Frequently Asked Questions
Q1: How many square metres does a 20kg bucket of Akfix EM600 cover?
Q2: Can Akfix EM600 be used on mabati (iron sheet) roofs?
Q3: How long does Akfix EM600 take to dry?
Q4: Is Akfix EM600 suitable for water tanks or swimming pools?
Q5: Where can I buy Akfix EM600 in Ongata Rongai or Nairobi?
Buy Akfix EM600 in Kenya – Best Price at Shabbiri Hardware
Looking for the best waterproofing membrane price in Kenya? Visit Shabbiri Hardware for genuine Akfix EM600 Waterguard, expert advice on surface preparation and coverage, plus everything you need for the job — primers, brushes, rollers, reinforcement mesh and repair mortars. We serve Ongata Rongai, Tuala, Kiserian, Ngong, Karen, Langata and the greater Nairobi area, with countrywide delivery available.
Magadi Road, Ongata Rongai 📍 Tuala Branch:
Tuala, past Nazarene University
📧 Email: info@shabbirihardware.co.ke
🌐 Website: www.shabbirihardware.co.ke
Specifications
| Brand | Akfix |
| Model | EM600 |
| Category | Waterproofing & Sealants |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.
