Loading branch status…
Home / Silicone Sealants & Fillers / Asmaco Instant Grab Adhesive Sealant 280ml – Instant Grab & Hold, Underwater & Wet Area Adhesive in Kenya
Asmaco Instant Grab Adhesive Sealant 280ml – Instant Grab & Hold, Underwater & Wet Area Adhesive in Kenya
Asmaco · Model AS-IN-280ml

Asmaco Instant Grab Adhesive Sealant 280ml – Instant Grab & Hold, Underwater & Wet Area Adhesive in Kenya

KSH 1,000/ piece
KSH 1,200Save 17%
In stock
About this product
Asmaco Instant Grab Adhesive Sealant Kenya | Shabbiri Hardware

Asmaco Instant Grab Adhesive Sealant 280ml – Instant Grab & Hold, Underwater & Wet Area Adhesive in Kenya

No screws. No nails. No clamps. Grabs instantly and holds up to 600 kg/m² — even underwater.

Instant Grab & Hold Underwater Application 600 kg/m² Grab Strength Non-Corrosive All-Purpose I-Tech Sealant

Asmaco Instant Grab is a high-strength, elastomeric grab adhesive and sealant in one cartridge — the fundi's answer to "no more nails". Its I-Tech Sealant formulation grips the moment you press the item in place, holding up to 600 kg per square metre without screws, nails, clamps or temporary supports. Unlike ordinary construction adhesives, it bonds on dry surfaces, wet surfaces and even fully underwater, so you can fix a leaking pipe, water tank or swimming pool tile without draining first. Available now at Shabbiri Hardware, Magadi Road Ongata Rongai and Tuala (past Nazarene University), Nairobi.

Why Fundis & Contractors in Kenya Choose Asmaco Instant Grab

  • Instant grab & hold – locks items in place immediately; no bracing or waiting
  • Works underwater & on wet surfaces – seal active leaks without draining tanks, pools or pipes
  • Massive 600 kg/m² grab strength – handles heavy panels, stone, mirrors and cladding
  • Non-corrosive – safe for mirror backing, metals and sensitive surfaces
  • Adhesive + sealant in one – bonds AND waterproof-seals in a single application
  • Permanently flexible – absorbs vibration and building movement without cracking
  • Paintable – blends into any finish once cured
  • Non-sag formula – applies cleanly on vertical and overhead surfaces
  • UV, weather, mildew & chemical resistant – for indoor and outdoor use in Kenyan conditions
  • Low odour & VOC compliant – meets green building requirements

Asmaco Instant Grab – Full Technical Specifications

Product NameAsmaco Instant Grab Adhesive Sealant
Product TypeHigh-strength elastomeric grab adhesive & sealant (I-Tech Sealant technology)
Cartridge Size280 ml (approx. 500 g) – standard caulking gun cartridge
Instant Grab StrengthUp to 600 kg/m²
Application SurfacesDry, wet and underwater application
Curing Time24 – 48 hours
Full Strength7 days (maximum bond strength)
ConsistencyNon-sag paste – suitable for vertical & overhead application
FlexibilityPermanently flexible after cure
CorrosivenessNon-corrosive – safe for mirrors and metals
ResistanceUV, weathering, mildew, micro-organisms and chemicals
PaintabilityPaintable once cured
Odour / VOCLow odour, VOC compliant (green building friendly)
Suitable SubstratesMetal, wood, tile, ceramic, marble, porcelain, glass, granite, brick, concrete, stone, masonry, plaster, stucco, drywall, gypsum, fibreglass, foam, rubber and most plastics
ManufacturerAnchor Allied (Asmaco), UAE
Availability in KenyaIn stock at Shabbiri Hardware – Ongata Rongai & Tuala branches, Nairobi

Common Applications

Wet & Underwater Repairs

Sealing leaking water tanks and pipes without draining, swimming pool tile fixing and repairs, sealing showers, baths and wet areas, gutter sealing.

Interior Fit-Out

Fixing PVC fluted panels, PS wall panels and gypsum mouldings; bonding skirting, trims, cornices and dado rails; installing mirrors (non-corrosive), backsplashes, countertops and cabinets; wall stone and cladding installation.

Construction & Exterior

Window and door installation and sealing, masonry sealing, bonding landscape blocks, roofing repairs, HVAC sealing, signage fixing, marine and automotive repairs, and general DIY and emergency repairs.

How to Use Asmaco Instant Grab – Step by Step

Step 1 – Prepare the surface: Remove dust, loose particles, grease and old adhesive. Surfaces can be dry or wet — no need to dry the area or drain water for leak repairs.
Step 2 – Cut the cartridge: Cut the cartridge tip above the thread, screw on the nozzle, and cut the nozzle at 45° to your desired bead size. Load into a standard caulking gun (also available at Shabbiri Hardware).
Step 3 – Apply the adhesive: For bonding, apply beads or blobs in vertical strips about 10–15 cm apart on the back of the item. For sealing, run a continuous bead along the joint or crack.
Step 4 – Press and position: Press the item firmly into place. The instant grab holds it immediately — no nails, props or masking tape needed. Adjust alignment within the first few minutes.
Step 5 – Tool the joint (sealing): For sealant joints, smooth the bead with a spatula or soapy finger within 5–10 minutes for a neat finish.
Step 6 – Let it cure: Allow 24–48 hours to cure. Avoid heavy loading for 7 days until maximum strength is reached. Paint over once fully cured if desired.
Fundi Tip: For heavy items like granite or large mirrors, apply adhesive over at least 60–70% of the contact area and press with a sliding motion to spread the adhesive and remove air pockets. One 280ml cartridge covers roughly 3–4 running metres at a 10mm bead.

Frequently Asked Questions

Can Asmaco Instant Grab be used underwater?

Yes. The I-Tech Sealant formulation bonds and seals on dry surfaces, wet surfaces and fully underwater. You can seal an active leak in a tank, pool or pipe without draining it first.

How strong is Asmaco Instant Grab?

It grabs instantly with a hold of up to 600 kg/m², so most items stay in place immediately without screws, nails or clamps.

How long does it take to dry?

It cures in 24–48 hours and reaches maximum strength in 7 days.

Is it safe for mirrors?

Yes. It is non-corrosive and will not damage mirror backing, making it ideal for mirror installation.

Can I paint over it?

Yes, Asmaco Instant Grab is paintable once fully cured.

Where can I buy Asmaco Instant Grab in Nairobi?

Visit Shabbiri Hardware on Magadi Road, Ongata Rongai, or our Tuala branch past Nazarene University. Call or WhatsApp 0741 042484 / 0745 554008 for today's price and delivery.

Buy Asmaco Instant Grab in Kenya – Shabbiri Hardware

📍 Branch 1: Magadi Road, Ongata Rongai, Nairobi

📍 Branch 2: Tuala, Past Nazarene University, Nairobi

📞 Call / WhatsApp: 0741 042484  |  0745 554008

✉️ Email: info@shabbirihardware.co.ke

🌐 Website: www.shabbirihardware.co.ke

Serving Ongata Rongai, Tuala, Kiserian, Karen, Langata & greater Nairobi since 1990. We also stock Sika construction chemicals, silicone sealants, gypsum, flooring, paints and full building materials. Ask anyone in Rongai.

KSH 1,000/ piece
KSH 1,200 · Save 17%
In stock
Delivery on request — same-day within Nairobi, next-day countrywide.
Free pickupat Rongai & Tuala branches.
Qty
1
📲 Order on WhatsApp
100% genuine, sourced materials
Secure M-Pesa & card payment
Countrywide delivery arranged
100% Genuine
No fakes, ever
Quality assured
Trusted brands only
Countrywide delivery
Arranged on request
Expert advice
Sales team on WhatsApp

Specifications

BrandAsmaco
ModelAS-IN-280ml
CategorySilicone Sealants & Fillers
AvailabilityIn stock
Sourced byShabbiri Hardware Kenya Limited

Customer reviews

No reviews yet — be the first to review this product.

Frequently bought together

Customers who bought this often add these to their order.