
DLC PU Foam 750ml – High Performance Polyurethane Expanding Gap Filler (Flame Retardant B3)
Product Description
DLC PU Foam 750ml is a high-performance, single-component polyurethane expanding foam engineered for filling, sealing, bonding and insulating gaps and cavities on construction and renovation sites. Supplied in a convenient 750ml straw-applicator aerosol can, it is dispensed as a soft paste that expands on contact with moisture in the air, then cures into a rigid, insulating cell structure that is tough and weather-resistant.
Full Technical Specifications
| Product Name | DLC PU Foam – High Performance |
|---|---|
| Type | Single-component, moisture-curing polyurethane expanding foam |
| Application | Straw / manual (hand-held) aerosol can |
| Net Volume | 750 ml |
| Primary Functions | Fill, Seal, Bond, Insulate |
| Fire Classification | Flame Retardant – B3 Grade |
| Standards | Meets ASTM performance requirements |
| Foaming | Rapid; expands approx. 2–3× dispensed volume |
| Tack-Free Time | A few minutes (temperature/humidity dependent) |
| Full Cure Time | Approx. 60 minutes (bead-size, temperature & humidity dependent) |
| Bond Strength | High bond strength |
| Adhesion | Concrete, brick, block, plaster, wood, metal, aluminium, PVC & most rigid plastics (not PE, PP, PTFE, silicone or oily surfaces) |
| Cell Structure | Rigid closed/semi-closed cell foam after curing |
| Thermal / Acoustic | Provides thermal insulation and sound-dampening |
| Water Resistance | Water-resistant once cured (protect exposed foam from UV) |
| Colour (cured) | Typically light yellow / cream |
| Packaging | Pressurised aerosol can with cap; straw applicator |
| Storage | Store upright in a cool, dry place; away from heat and sunlight |
Key Features & Benefits
- 🔗High Bond StrengthGrips firmly to almost all common building substrates for a permanent hold.
- 💨Rapid FoamingExpands 2–3× to fill irregular gaps and cavities with minimal product.
- 🔧Multipurpose UseOne foam for framing, sealing, bonding, insulating and soundproofing.
- ⏱Cured in ~60 minFast curing lets you trim, plaster and paint the same day.
- 🔥Flame Retardant (B3)Formulated for improved fire behaviour on site.
- 🌡Thermal & AcousticReduces heat loss, draughts and noise transmission.
What Is This Product Used For?
DLC PU Foam is a fill – seal – bond – insulate product used across building, plumbing, electrical and general finishing work. Typical applications include:
- Installing and sealing door and window frames
- Filling gaps, joints, cracks and cavities in walls, floors and roofs
- Thermal and acoustic insulation
- Sealing around pipe, cable, conduit and duct penetrations
- Bonding insulation boards, panels and thresholds
- Filling voids around electrical boxes and plumbing fixtures
- Weatherproofing and moisture sealing of joints and openings
- General draught-proofing and soundproofing
How It Works & How to Use It
DLC PU Foam is a moisture-curing polyurethane. When the pressurised liquid is dispensed, the propellant expands it into a foam, and humidity in the air and on the substrate triggers a curing reaction that hardens it into a solid, load-bearing cellular mass.
- Prepare the surface. Clean off dust, oil and loose particles, then lightly mist the area with clean water — the foam bonds best to slightly damp surfaces.
- Prepare the can. Shake vigorously for 20–30 seconds, remove the cap and fit the applicator straw onto the valve.
- Apply. Hold the can upside down (valve pointing down). Fill the gap only about 40–50% full — the foam expands 2–3×. Work vertical joints from the bottom up.
- Let it cure. Tack-free in a few minutes; full cure in roughly 60 minutes. For deep gaps, apply in layers, misting lightly with water between coats.
- Trim & finish. Once cured, cut away excess with a sharp knife. Plaster, sand and paint over it. Protect exposed foam from UV with paint, sealant or trim.
- Clean up. Remove fresh foam with acetone or PU foam cleaner. Cured foam can only be removed mechanically.
Store & Delivery Information
within Nairobi
to other towns across Kenya
Main Branch: Magadi Road, Ongata Rongai, Nairobi
Tuala Branch: Past Nazarene University, Tuala
Store Address: Magadi Rd, Ongata Rongai, Kenya
Delivery Locations: Nairobi, Mombasa, Nakuru, Kisumu, Eldoret, Thika, Naivasha, Kakamega, Bungoma, Kericho, Kitale, Machakos, Meru, Embu, Isiolo, Nanyuki, Malindi, Voi, Garissa, and more.
Order DLC PU Foam 750ml Today
Call or WhatsApp us and we’ll get it delivered to you.
Specifications
| Brand | DLC PU |
| Model | DLC-PU-750ML |
| Category | Silicone Sealants & Fillers |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



