Loading branch status…
Home / Silicone Sealants & Fillers / GP Silicone Sealant – General Purpose Acetic Cure Silicone for Glass, Aluminium and Sanitary Joints
📦

GP Silicone Sealant – General Purpose Acetic Cure Silicone for Glass, Aluminium and Sanitary Joints

KSH 350/ piece
In stock
About this product
GP Silicone Sealant Kenya | Shabbiri Hardware Nairobi
General Purpose Silicone

GP Silicone Sealant – General Purpose Silicone for Glass, Aluminium and Sanitary Joints

A ready-to-use, acetic cure silicone sealant that sets into a tough, flexible, waterproof rubber seal. Available at Shabbiri Hardware Kenya, Magadi Road, Ongata Rongai and Tuala.

General Purpose Acetic Cure Waterproof Stays Flexible Anti-Fungal

Product Overview

GP Silicone Sealant is a high quality, single-component general purpose silicone. It comes out of the cartridge as a smooth, non-sag paste and cures at room temperature by reacting with moisture in the air, forming a permanently elastic rubber seal.

It bonds very well, without primer, to non-porous surfaces such as glass, glazed ceramic tiles and aluminium, which makes it the everyday silicone for window and door fitters, aluminium fabricators, plumbers, tilers and home owners across Nairobi, Kajiado and the rest of Kenya.

Once cured, the seal resists water, sunlight (UV), ozone, weather and temperature changes, so joints stay sealed through hot days, cold nights and rainy seasons.

Technical Specifications

Product nameGP Silicone Sealant (General Purpose)
Sealant typeOne-component silicone sealant, ready to use
Cure systemAcetic (acetoxy) cure – cures with moisture in the air at room temperature
ConsistencySmooth non-sag paste – holds its shape in vertical and overhead joints
Cured formFlexible, permanently elastic silicone rubber
AdhesionVery good unprimed adhesion to glass, glazed ceramic tiles and aluminium; also used on painted metal, steel, masonry and many plastics
ResistanceWater, moisture, UV, ozone, weathering and temperature extremes
Mould resistanceAnti-fungal – suited to sanitary and wet areas
Curing behaviourSkins on the surface first, then cures inwards; typical for this class of silicone is about 2–3 mm depth per day at 25°C
PackagingPlastic cartridge with screw-on nozzle, fits a standard caulking gun
Application toolManual or pneumatic caulking gun
PaintableNo – silicone cannot be painted over
StorageKeep sealed in a cool, dry place away from direct sun; check the date printed on the cartridge
Exact figures such as cartridge volume, tack-free time and hardness are printed on the cartridge and in the manufacturer's data sheet. Ask our team for the data sheet if your project needs certified values.

Key Benefits

One tube, many jobsSeals glass, aluminium, tiles and sanitary fittings, so one product covers most day-to-day sealing work.
Fast curingSkins quickly and cures at room temperature with no mixing and no heating.
Stays flexibleThe cured bead stretches and recovers as frames and panels expand in the heat and shrink in the cold.
Fully waterproofKeeps rain out of window frames and stops water creeping behind sinks, basins and shower trays.
Resists mouldThe anti-fungal formula helps the seal stay clean in bathrooms and kitchens.
No primer on glass and aluminiumBonds directly to clean non-porous surfaces, saving time on site.
Does not slumpThe non-sag paste stays where you gun it, even on vertical joints.

Best Places to Use It

Windows and doorsSealing glass into aluminium and steel frames, and sealing frames to the wall opening.
Aluminium and glass fabricationShopfronts, partitions, display cabinets, showcases and general non-structural glazing.
Bathrooms and kitchensAround sinks, wash basins, bathtubs, shower trays, WC bases and worktop edges.
TilingMovement joints and corners between glazed ceramic tiles and fittings.
Panels and claddingSealing joints in metal panels, alucobond-type cladding edges and panel stiffeners.
General repairsSealing gaps around pipes, vents, roof-light frames, signage and household fittings.

How to Use GP Silicone Sealant

Step 1Clean the jointSurfaces must be clean and dry, with no oil, grease, dust, soap residue or old loose sealant. Wipe glass and metal with a clean cloth and a suitable solvent, then let it dry.
Step 2Mask the edgesRun masking tape along both sides of the joint for a straight, neat line. Use a backer rod in deep gaps so the sealant is not wasted.
Step 3Open the cartridgeCut the tip of the cartridge thread, screw on the nozzle, then cut the nozzle at an angle to match the width of the joint.
Step 4Load the gunPlace the cartridge in a standard caulking gun and squeeze until the sealant reaches the nozzle tip.
Step 5Gun the sealantApply in one continuous bead, pushing the sealant into the gap so it fills the joint fully with no air pockets.
Step 6Tool the surfaceSmooth the bead with a spatula or tooling stick within a few minutes, before the surface skins.
Step 7Remove tape and leave to curePull off the masking tape straight away. Keep the joint dry and undisturbed for about 24 hours; deep joints need longer.
Wipe off uncured sealant with a dry cloth. Cured silicone has to be cut or scraped away. Work in a ventilated area, as acetic cure silicone gives off a vinegar smell while it sets.

Quantity Guide

How far one cartridge goes depends on the size of the joint. As a working estimate for a standard cartridge of about 280 ml:

Joint 5 mm wide × 5 mm deepAbout 11 metres per cartridge
Joint 6 mm wide × 6 mm deepAbout 7.5 metres per cartridge
Joint 8 mm wide × 8 mm deepAbout 4 metres per cartridge
Joint 10 mm wide × 10 mm deepAbout 2.8 metres per cartridge
Add around 10% for wastage. Send us your joint sizes and total length on WhatsApp and we will work out the number of cartridges for you.

Available Options

GP Silicone Sealant is sold per cartridge and by the carton for contractors, fabricators and resellers. Colours in stock change, so please call or WhatsApp to confirm the colour you need before you travel.

We also stock caulking guns, masking tape, other Sika and Akfix sealants, and adhesives for jobs where a neutral cure, structural or paintable sealant is the better choice.

Good to Know Before You Buy

Not for painting overUse an acrylic sealant where the joint must be painted.
Test sensitive surfaces firstAcetic cure silicone can affect copper, brass, zinc, mirror backing and some natural stone. Try a small hidden area first or ask us for a neutral cure silicone.
Not for structural glazingFor load-bearing glass bonding, ask for a structural silicone.
Not for permanently submerged jointsSuch as water tanks, pools and aquariums, unless the manufacturer's data sheet approves it.
SafetyAvoid contact with eyes and skin, keep away from children and ventilate the room while the sealant cures.

Delivery and Collection

Collect from either branch on Magadi Road, or have it delivered. Delivery is arranged by location: boda delivery where reachable around Rongai, Tuala, Kiserian and Nairobi, and courier service for upcountry orders. Delivery is charged according to distance.

Frequently Asked Questions

What is GP Silicone Sealant used for?

It is a general purpose silicone for sealing joints around glass, aluminium windows and doors, glazed ceramic tiles, sinks, basins and other non-porous surfaces where a flexible waterproof seal is needed.

Can I paint over it?

No. Paint does not hold on cured silicone. Pick a sealant colour that suits the finish, or use an acrylic sealant where the joint must be painted.

How long does it take to dry?

The surface skins within minutes and the bead then cures from the outside inwards. Allow about 24 hours before exposing a normal bead to water, and longer for deep joints.

Is it waterproof?

Yes. Once fully cured it forms a waterproof rubber seal that resists rain, moisture and sunlight.

Can I use it in a bathroom?

Yes. It is anti-fungal and made for sanitary joints around basins, tubs, shower trays and tiles.

What is the difference between GP silicone and neutral silicone?

GP silicone is acetic cure: it sets fast, bonds strongly to glass and aluminium and has a vinegar smell while curing. Neutral cure silicone has little smell and is kinder to sensitive metals, mirrors, stone and concrete.

Do you sell in bulk?

Yes. We supply single cartridges and full cartons at both branches for contractors, fabricators and resellers.

Where can I buy GP Silicone Sealant in Nairobi?

At Shabbiri Hardware Kenya on Magadi Road, Ongata Rongai, and at our Tuala branch past Nazarene University.

Visit or Contact Shabbiri Hardware Kenya

Ongata Rongai Branch

Magadi Road, Ongata Rongai, opposite Hashi Petrol Station Phone: 0741 042484 Open Rongai Branch in Google Maps

Tuala Branch

Magadi Road, Tuala, past Nazarene University Phone / WhatsApp: 0745 554008 Open Tuala Branch in Google Maps
KSH 350/ piece
In stock
Delivery on request — same-day within Nairobi, next-day countrywide.
Free pickupat Rongai & Tuala branches.
Qty
1
📲 Order on WhatsApp
100% genuine, sourced materials
Secure M-Pesa & card payment
Countrywide delivery arranged
100% Genuine
No fakes, ever
Quality assured
Trusted brands only
Countrywide delivery
Arranged on request
Expert advice
Sales team on WhatsApp

Specifications

CategorySilicone Sealants & Fillers
AvailabilityIn stock
Sourced byShabbiri Hardware Kenya Limited

Customer reviews

No reviews yet — be the first to review this product.

Frequently bought together

Customers who bought this often add these to their order.