Loading branch status…
Home / Gypsum Boards & Accessories / GYPROC FILLER PROPLAST
GYPROC FILLER PROPLAST
Gyproc

GYPROC FILLER PROPLAST

KSH 2,000/ piece
In stock
About this product
Gypsum Boards & Accessories

Gyproc Filler ProPlast 25kg: Skim Coat Plaster for Smooth Walls & Ceilings

Gyproc Filler ProPlast is a white, gypsum-based finishing plaster made by Gyproc (Saint-Gobain). It is used to skim, fill and level interior walls and ceilings before painting. Apply it in a thin coat over cement-rendered walls, concrete slabs and gypsum boards to get a smooth, even, crack-free surface that takes paint beautifully.

25 kg bag Interior use 1–3 mm skim coat No bonding agent needed Low shrinkage

Technical Specifications

BrandGyproc (Saint-Gobain)
ProductFiller ProPlast / Wall Finish skim coat plaster
MaterialHemihydrate gypsum (calcium sulphate) with performance additives
ColourWhite
Pack size25 kg bag
Application thickness1 mm to 3 mm per coat
Approximate coverageAbout 12.5 m² per bag at 2 mm thick
Mixing water8 to 10 litres of clean water per bag
Drying shrinkageAbout 0.03% (cement plaster is about 0.1%)
Suitable surfacesCement render, concrete, gypsum board, cement board
UseInterior walls and ceilings only
StandardsEN 13279-1, BS 1191 Part 1, ASTM C28, TIS 188-2547

Why Fundis Choose Gyproc ProPlast

Extra smooth finish

Super-fine gypsum gives a level, glass-smooth surface ready for emulsion or gloss paint.

No cracking

Very low drying shrinkage, far less than cement-based plaster, so the finish stays free of hairline cracks.

Strong adhesion

Bonds directly to concrete slabs and rendered walls without a separate bonding agent.

Easy & time saving

Light, creamy mix that spreads easily with a steel trowel. Less sanding and faster painting.

Covers more area

A thin 1–3 mm coat means one bag goes a long way compared with traditional plastering.

Trusted brand

Made by Gyproc to international plaster standards for consistent quality, bag after bag.

Where to Use It

  • Skimming sand & cement rendered walls
  • Smoothing cast concrete walls and ceiling slabs
  • Finishing gypsum board and cement board surfaces
  • Filling small holes, dents and surface defects
  • Levelling rough walls before painting
  • Renovating old walls in homes, offices and shops

Quick Coverage Guide (per 25 kg bag)

±25 m²at 1 mm thin skim
±12.5 m²at 2 mm standard coat
±8 m²at 3 mm on rough walls

Coverage depends on how rough the wall is. Add about 10% for wastage when ordering.

How to Apply

  1. Prepare the surface. Make sure the wall is firm, clean and free of dust, oil and loose material. Wet very dry or porous walls lightly.
  2. Add powder to water. Pour one 25 kg bag into 8–10 litres of clean water in a clean bucket. Always add powder to water.
  3. Let it soak, then mix. Leave the powder to soak for 2–3 minutes, then mix to a smooth, lump-free paste.
  4. Apply the first coat. Spread with a steel trowel at 1–2 mm, working from bottom to top.
  5. Apply the second coat. When the first coat firms up, apply a thin second coat to bring the total to 2–3 mm.
  6. Trowel smooth. Polish the surface with a clean trowel as it sets for a fine, even finish.
  7. Dry, then paint. Protect from direct sun and let it dry fully. Apply a primer or sealer before your top coat paint.
Pro tips for a perfect finish
  • Use clean water and clean tools for every mix. Dirty buckets shorten working time.
  • Mix only what you can apply before it starts to set.
  • Do not re-mix plaster that has started setting.
  • Store bags in a dry place, off the floor and away from damp and sunlight.
  • For interior use only. Not for wet areas or outside walls.

Frequently Asked Questions

How many bags do I need for one room?

A typical 3 m × 4 m room has about 40 m² of wall. At a 2 mm coat you need about 3 to 4 bags for the walls. Send us your room sizes on WhatsApp and we will calculate it for you.

Can I apply it directly on a concrete ceiling?

Yes. Gyproc ProPlast bonds to concrete slabs without a bonding agent. Just make sure the surface is clean and dust-free.

Can I use it outside?

No. It is a gypsum plaster for interior walls and ceilings only. For exterior walls ask us about cement-based skim coats.

Do I need to prime before painting?

Yes. Once fully dry, apply a primer or sealer, then your top coat. We stock Crown Paints primers and finishes at both branches.

Do you install?

We supply materials only. We can share contacts of experienced independent fundis on request.

Order or Ask a Question

Visit Our Branches

Ongata Rongai Branch

Magadi Road, opposite Hashi Petrol Station, Ongata Rongai

Call: 0792 961 751

Get directions to Rongai

Tuala Branch

Magadi Road, Tuala, past Nazarene University

Call: 0741 393 113

Get directions to Tuala
KSH 2,000/ piece
In stock
Delivery on request — same-day within Nairobi, next-day countrywide.
Free pickupat Rongai & Tuala branches.
Qty
1
📲 Order on WhatsApp
100% genuine, sourced materials
Secure M-Pesa & card payment
Countrywide delivery arranged
100% Genuine
No fakes, ever
Quality assured
Trusted brands only
Countrywide delivery
Arranged on request
Expert advice
Sales team on WhatsApp

Specifications

BrandGyproc
CategoryGypsum Boards & Accessories
AvailabilityIn stock
Sourced byShabbiri Hardware Kenya Limited

Customer reviews

No reviews yet — be the first to review this product.

Frequently bought together

Customers who bought this often add these to their order.