
GYPROC FILLER PROPLAST
Gyproc Filler ProPlast 25kg: Skim Coat Plaster for Smooth Walls & Ceilings
Gyproc Filler ProPlast is a white, gypsum-based finishing plaster made by Gyproc (Saint-Gobain). It is used to skim, fill and level interior walls and ceilings before painting. Apply it in a thin coat over cement-rendered walls, concrete slabs and gypsum boards to get a smooth, even, crack-free surface that takes paint beautifully.
Why Fundis Choose Gyproc ProPlast
Extra smooth finish
Super-fine gypsum gives a level, glass-smooth surface ready for emulsion or gloss paint.
No cracking
Very low drying shrinkage, far less than cement-based plaster, so the finish stays free of hairline cracks.
Strong adhesion
Bonds directly to concrete slabs and rendered walls without a separate bonding agent.
Easy & time saving
Light, creamy mix that spreads easily with a steel trowel. Less sanding and faster painting.
Covers more area
A thin 1–3 mm coat means one bag goes a long way compared with traditional plastering.
Trusted brand
Made by Gyproc to international plaster standards for consistent quality, bag after bag.
Where to Use It
- Skimming sand & cement rendered walls
- Smoothing cast concrete walls and ceiling slabs
- Finishing gypsum board and cement board surfaces
- Filling small holes, dents and surface defects
- Levelling rough walls before painting
- Renovating old walls in homes, offices and shops
Technical Specifications
| Brand | Gyproc (Saint-Gobain) |
|---|---|
| Product | Filler ProPlast / Wall Finish skim coat plaster |
| Material | Hemihydrate gypsum (calcium sulphate) with performance additives |
| Colour | White |
| Pack size | 25 kg bag |
| Application thickness | 1 mm to 3 mm per coat |
| Approximate coverage | About 12.5 m² per bag at 2 mm thick |
| Mixing water | 8 to 10 litres of clean water per bag |
| Drying shrinkage | About 0.03% (cement plaster is about 0.1%) |
| Suitable surfaces | Cement render, concrete, gypsum board, cement board |
| Use | Interior walls and ceilings only |
| Standards | EN 13279-1, BS 1191 Part 1, ASTM C28, TIS 188-2547 |
Quick Coverage Guide (per 25 kg bag)
Coverage depends on how rough the wall is. Add about 10% for wastage when ordering.
How to Apply
- Prepare the surface. Make sure the wall is firm, clean and free of dust, oil and loose material. Wet very dry or porous walls lightly.
- Add powder to water. Pour one 25 kg bag into 8–10 litres of clean water in a clean bucket. Always add powder to water.
- Let it soak, then mix. Leave the powder to soak for 2–3 minutes, then mix to a smooth, lump-free paste.
- Apply the first coat. Spread with a steel trowel at 1–2 mm, working from bottom to top.
- Apply the second coat. When the first coat firms up, apply a thin second coat to bring the total to 2–3 mm.
- Trowel smooth. Polish the surface with a clean trowel as it sets for a fine, even finish.
- Dry, then paint. Protect from direct sun and let it dry fully. Apply a primer or sealer before your top coat paint.
- Use clean water and clean tools for every mix. Dirty buckets shorten working time.
- Mix only what you can apply before it starts to set.
- Do not re-mix plaster that has started setting.
- Store bags in a dry place, off the floor and away from damp and sunlight.
- For interior use only. Not for wet areas or outside walls.
Frequently Asked Questions
How many bags do I need for one room?
A typical 3 m × 4 m room has about 40 m² of wall. At a 2 mm coat you need about 3 to 4 bags for the walls. Send us your room sizes on WhatsApp and we will calculate it for you.
Can I apply it directly on a concrete ceiling?
Yes. Gyproc ProPlast bonds to concrete slabs without a bonding agent. Just make sure the surface is clean and dust-free.
Can I use it outside?
No. It is a gypsum plaster for interior walls and ceilings only. For exterior walls ask us about cement-based skim coats.
Do I need to prime before painting?
Yes. Once fully dry, apply a primer or sealer, then your top coat. We stock Crown Paints primers and finishes at both branches.
Do you install?
We supply materials only. We can share contacts of experienced independent fundis on request.
Order or Ask a Question
Visit Our Branches
Ongata Rongai Branch
Magadi Road, opposite Hashi Petrol Station, Ongata Rongai
Call: 0792 961 751
Tuala Branch
Magadi Road, Tuala, past Nazarene University
Call: 0741 393 113
Specifications
| Brand | Gyproc |
| Category | Skim Coats & Fillers |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



