
Insutech Insucoat WB Bituminous Emulsion 20kg – Water-Based Liquid Bitumen Waterproofing
Insutech Insucoat WB is a water-based bituminous emulsion (liquid bitumen) for waterproofing and damp-proofing. It goes on brown and dries to a black, flexible film that blocks water and vapour. You apply it cold by brush, roller or spray, it bonds to concrete, metal and wood, and it can go onto damp surfaces. A 20kg pail covers about 60–80 m² per coat.
Key facts
- Coverage: 3–4 m² per kg per coat (about 60–80 m² per coat from a 20kg pail)
- Time between coats: 3–4 hours, depending on temperature
- Full cure: 24 hours
- Application temperature: 5°C to 45°C
- Application: brush, roller or airless spray, applied cold with no torch or heating
- Safety: water-based, non-flammable and environmentally friendly
Where to use it
- Damp-proofing foundations and basement walls before backfilling
- Waterproofing concrete and blockwork, including surfaces that are still damp
- Protecting concrete, metal and wood from water, salts and chemicals
- As a curing compound on fresh concrete, since the film holds water in the concrete while it cures
How to apply
- Clean the surface of dust, oil and loose material, and repair cracks and honeycombing.
- Stir the emulsion well to an even consistency.
- Apply the first coat evenly by brush, roller or spray, working it into corners and details.
- Let it dry completely (3–4 hours, depending on temperature).
- Apply the second coat at right angles to the first.
- Protect the coating from rain and damage until fully cured (24 hours), then backfill or screed.
Technical data
| Brand | Insutech (International Company for Insulation Technology) |
| Product | Insucoat WB, water-based bitumen emulsion |
| Pack | 20kg pail |
| Colour | Dark brown when wet, black when dry |
| Density | 1.05 ± 0.1 g/cc (ASTM D 2939) |
| Solid content | 35 ± 3% (ASTM D 2939) |
| Heat test | 100 ± 3°C, no blistering, sagging or slipping |
| Water resistance | 24 hours, no blistering or re-emulsification |
| Shelf life | Up to 12 months |
Frequently asked questions
How many square metres does a 20kg pail of Insucoat cover?
About 60–80 m² for one coat, at 3–4 m² per kg. Most jobs need two coats, so plan on roughly 30–40 m² of finished two-coat waterproofing per pail. Rough or porous surfaces use more.
How much is Insucoat bituminous emulsion in Kenya?
KSh 4,000 per 20kg pail at Shabbiri Hardware, in stock at our Ongata Rongai (Magadi Road) and Tuala branches. Ask us about bulk prices for contractors.
Can Insucoat be applied on damp concrete?
Yes. It's water-based and can be applied to damp surfaces. Make sure there's no standing water and the surface is clean and sound.
How long does it take to dry?
Leave 3–4 hours between coats, depending on temperature. It's fully cured after 24 hours, and you should keep it dry and protected until then.
Is it safe to use indoors?
It's water-based, non-flammable and non-hazardous, so it's safer to handle than solvent-based bitumen. Still work with good ventilation and wear gloves.
What else do I need for a roof or foundation waterproofing job?
For torch-on roof waterproofing, see our APP membranes and bitumen primers. For cementitious systems, see our waterproofing range.
Visit our branches on Magadi Road
Need a quotation?
Tell us the quantity or your measurements and we'll send a quotation the same day.
✉️ shabbirihardware@gmail.com · 🌐 shabbirihardware.co.ke
M-Pesa Paybill 542 542 · Account 78653
Specifications
| Brand | Insutech |
| Model | Insucoat WB |
| Category | Waterproofing & Sealants |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



