Loading branch status…
Home / Waterproofing & Sealants / Kenbro Bitumen Primer BF4 – Solvent Based Bitumen Primer 5 Litre
Kenbro Bitumen Primer BF4 – Solvent Based Bitumen Primer 5 Litre
Bitumen · Model BF4

Kenbro Bitumen Primer BF4 – Solvent Based Bitumen Primer 5 Litre

KSH 1,740/ can
In stock
About this product
Kenbro Bitumen Primer BF4 5 Litre | Solvent Based Primer Nairobi | Shabbiri Hardware

Kenbro Bitumen Primer BF4 – Solvent Based Bitumen Primer 5 Litre

A fast-penetrating, solvent based bitumen primer made in Kenya by Kenbro Industries. It seals and bonds concrete surfaces so torch-on membranes and bitumen waterproofing coatings stick firmly – and it doubles as a protective coating for metal.

Solvent Based Concrete Priming Metal Protection 5 Litre Jerrican Made in Kenya

Product Overview

Kenbro Bitumen Primer BF4 is a solvent based bitumen primer designed for priming concrete surfaces before bitumen based waterproofing. The low-viscosity liquid soaks into the pores of concrete, screed and plaster, binds loose dust and leaves a tacky bituminous film that gives waterproofing membranes and coatings a strong, long-lasting grip.

Whether you are waterproofing a flat concrete roof, a balcony, a basement wall, a water tank base or a foundation, priming with BF4 is the step that stops membranes from lifting, blistering or peeling. It is also suitable for coating and protecting steel and other metal surfaces against moisture and corrosion.

Technical Specifications

Product NameKenbro Bitumen Primer BF4
Brand / ManufacturerKenbro Industries Ltd, Nairobi, Kenya
Product TypeSolvent based bitumen primer
Pack Size5 Litre jerrican
ColourBlack
FormLiquid, ready to use after stirring
BaseBitumen in organic solvent
Coverage RateApprox. 0.15 litres per m² per coat, depending on surface
Recommended CoatsTwo thin coats, second coat at a right angle to the first
Application MethodBrush or roller
Suitable SurfacesConcrete, screed, plaster, masonry and metal
Compatible SystemsTorch-on bitumen membranes, bitumen emulsions and bitumen based waterproofing coatings
Tool CleaningThinner, while still wet
HazardFlammable – keep away from flames and sparks

Key Features & Benefits

Deep Penetration

Thin solvent carrier soaks into porous concrete and plaster for a firm key.

Stronger Membrane Bond

Prevents torch-on membranes and bitumen coats from lifting and blistering.

Dust Binding

Locks down fine surface dust that would otherwise weaken adhesion.

Metal Protection

Forms a protective bituminous film on steel against moisture and rust.

Easy Application

Goes on smoothly with an ordinary brush or roller – no special equipment.

Economical Coverage

A little goes a long way when applied in thin, even coats.

Locally Manufactured

Made in Nairobi by Kenbro and suited to Kenyan site conditions.

Handy 5L Pack

Sealed jerrican with carry handle – ideal for homes and medium sites.

Applications

  • Priming flat concrete roofs and slabs before torch-on bitumen membrane installation
  • Balconies, terraces, parapets and concrete gutters
  • Basement walls, retaining walls and foundations before bitumen tanking
  • Bathrooms, wet areas and shower trays before bitumen based waterproofing
  • Concrete water tank bases, planters and septic chambers
  • Coating and protecting steel pipes, metal tanks, posts and fabricated metalwork

How to Use Kenbro Bitumen Primer BF4

1
Prepare the surfaceMake sure the surface is smooth, clean and dry, and free from dust, grease, polish and any other foreign material. Sweep or blow off loose particles.
2
Check moistureNew concrete floors and plaster must be left to dry out fully before priming. There should be no sign of rising damp.
3
Check old coatingsAny previous bitumen or emulsion coating must be fully dried and cured before applying the primer.
4
Stir wellStir the contents thoroughly before use to get an even mix.
5
Apply the first coatUsing a brush or roller, lay the primer on as thinly as possible. Apply smoothly and gently – do not rub it onto the surface.
6
Let it dryAllow the first coat to dry completely. Drying time depends on temperature, airflow and how porous the surface is.
7
Apply the second coatTwo coats are always preferred. Apply the second coat at a right angle to the first for full, even coverage.
8
Continue with waterproofingOnce the primer is dry, proceed with your torch-on membrane or bitumen waterproofing coating.
9
Clean toolsClean brushes and rollers with thinner while they are still wet.
Quantity guide: at about 0.15 L per m², one 5 litre can primes roughly 33 m² in a single coat, or about 16 m² with the recommended two coats. Porous or rough surfaces will use more.

Safety & Storage

  • The product is flammable – no smoking, open flames or sparks during use and while drying.
  • When torching membranes, make sure the primer is completely dry first.
  • Work in a well-ventilated area and avoid breathing the vapours.
  • Avoid contact with the eyes. If contact occurs, wash immediately with plenty of water.
  • Wear gloves and eye protection during application.
  • Keep the container tightly closed, stored in a cool, shaded place, and out of reach of children.

Frequently Asked Questions

What is Kenbro Bitumen Primer BF4 used for?

It primes concrete before bitumen based waterproofing such as torch-on membranes and bitumen coatings, and also coats and protects metal.

Do I really need a primer before torch-on membrane?

Yes. Primer binds surface dust and seals the pores so the membrane bonds fully. Skipping it is one of the main causes of membranes lifting and leaking.

Can I apply it on damp concrete?

No. The surface must be dry, and new concrete or plaster should be allowed to dry out before priming.

Can BF4 be used on metal?

Yes – it is suitable for metal coating and protection, such as steel pipes, tanks and posts.

Do you install waterproofing?

Shabbiri Hardware supplies materials only. We are happy to share contacts of independent waterproofing installers.

Where can I buy it in Nairobi?

At both Shabbiri Hardware branches on Magadi Road – Ongata Rongai and Tuala.

Find Us – Two Branches on Magadi Road

Ongata Rongai Branch

Magadi Road, opposite Hashi Petrol Station, Ongata Rongai, Nairobi

Tuala Branch

Magadi Road, past Nazarene University, Tuala, Nairobi

Contact Shabbiri Hardware

Trusted hardware and building materials supplier since 1990. Call, WhatsApp or email us for availability and bulk orders of Kenbro Bitumen Primer BF4 and other waterproofing products.

Phone / WhatsApp0741 042484
Phone / WhatsApp0745 554008
KSH 1,740/ can
In stock
Delivery on request — same-day within Nairobi, next-day countrywide.
Free pickupat Rongai & Tuala branches.
Qty
1
📲 Order on WhatsApp
100% genuine, sourced materials
Secure M-Pesa & card payment
Countrywide delivery arranged
100% Genuine
No fakes, ever
Quality assured
Trusted brands only
Countrywide delivery
Arranged on request
Expert advice
Sales team on WhatsApp

Specifications

Brand Bitumen
ModelBF4
CategoryWaterproofing & Sealants
AvailabilityIn stock
Sourced byShabbiri Hardware Kenya Limited

Customer reviews

No reviews yet — be the first to review this product.

Frequently bought together

Customers who bought this often add these to their order.