Kenyos LCE-06K Euro Profile Door Cylinder Lock with 5 Keys
A dependable replacement lock cylinder (door lock barrel) for mortise door locks in homes, apartments, offices, shops and gates. Change the cylinder in minutes and take back control of who holds a key — available now at Shabbiri Hardware, Magadi Road, Ongata Rongai and Tuala, Nairobi.
Product Overview – Kenyos Cylinder Lock LCE-06K
The Kenyos LCE-06K cylinder lock is a euro profile, double-sided key cylinder — the removable "barrel" part of a mortise door lock that the key actually turns in. When keys are lost, a house help or tenant moves out, or the old barrel becomes stiff and worn, you do not need to replace the whole lock. Simply swap in a new door lock cylinder and every old key stops working.
Kenyos is a well-known hardware and tools brand in Kenya, and this cylinder is built for everyday residential and light-commercial use. It comes with 5 keys, so there is one for every member of the household plus spares. It suits wooden, steel and aluminium doors fitted with a euro-profile mortise lock, including main doors, bedroom doors, office doors, shop doors and gate locks.
Looking for a cylinder lock in Kenya you can collect today? Shabbiri Hardware has served Nairobi builders, fundis and homeowners since 1990 from our two branches on Magadi Road — Ongata Rongai (opposite Hashi Petrol Station) and Tuala (past Nazarene University).
Key Features & Benefits
🔐 Pin-tumbler security
Precision pin-tumbler mechanism: only the matching key lines up the pins and turns the cam.
🔑 5 keys supplied
Enough keys for the family, staff and a spare kept safely away from the door.
🚪 Double-sided operation
Lock and unlock with a key from both inside and outside the door.
⚙️ Standard euro profile
Standard DIN euro-profile shape and central fixing screw — fits most euro mortise locks sold in Kenya.
🛠️ Quick DIY replacement
One screw holds it in. Swap it yourself in 10–15 minutes with a screwdriver.
💰 Low-cost re-keying
Re-secure a door after lost keys without buying a whole new lockset.
Technical Specifications
| Brand | Kenyos |
|---|---|
| Model / Code | LCE-06K |
| Product type | Euro profile door lock cylinder (lock barrel / lock core) |
| Cylinder style | Double cylinder – key operated from both sides |
| Profile standard | Euro profile (DIN 18252 shape) |
| Locking mechanism | Pin tumbler |
| Keys supplied | 5 keys |
| Cam | Standard euro cam, rotates to throw the lock bolt / latch |
| Fixing | Single central fixing screw through the edge of the door (M5 type) |
| Cylinder length | As marked on the pack — check A (outside) and B (inside) measurements before buying |
| Compatible locks | Euro-profile mortise locks, sash locks, deadlocks, gate locks and shop door locks |
| Suitable doors | Wooden, steel (metal) and aluminium doors |
| Application | Main doors, bedroom & bathroom doors, offices, shops, stores, gates |
| Installation | DIY or by any fundi / locksmith — screwdriver only |
| Packaging | 1 cylinder + 5 keys per pack |
ℹ️ Cylinder length and finish can vary between batches. Please confirm the size on the pack, or bring your old cylinder to our Rongai or Tuala branch and our team will match it for you.
How to Measure Your Old Cylinder (Before You Buy)
The most common mistake when buying a replacement lock cylinder is getting the wrong length. A cylinder that is too long sticks out and can be snapped; one that is too short will not reach the key. Measure like this:
Ideally the new cylinder should stand no more than about 3 mm proud of the door handle plate on the outside. If you are unsure, remove the old cylinder (steps below) and bring it to us.
How to Install the Kenyos LCE-06K Cylinder Lock
You will need: a Phillips or flat screwdriver, the old key (if available) and the new Kenyos cylinder with its keys.
- Open the door. Work with the door open so you cannot lock yourself out.
- Find the fixing screw. On the edge of the door, on the lock faceplate, locate the long screw directly in line with the cylinder.
- Remove the screw. Unscrew it completely and keep it — you may re-use it if the new one is not needed.
- Align the cam. Insert the old key and turn it about 10–15° either way until the cam lines up with the cylinder body.
- Pull out the old cylinder. Holding the key in that position, gently pull the cylinder out of the lock.
- Prepare the new cylinder. Insert a Kenyos key and turn slightly so the cam sits flush inside the profile.
- Slide it in. Push the new cylinder into the lock from the outside, with the fixing hole lined up with the screw hole on the door edge.
- Refit the screw. Tighten the fixing screw firmly — but do not over-tighten, or the cam may bind.
- Test before closing. With the door still open, lock and unlock from both sides with each of the 5 keys. Then close the door and test again.
How to Use & Look After Your Cylinder Lock
Daily use
- Insert the key fully until it stops.
- Turn smoothly in the locking direction until the bolt throws — usually one full turn.
- Turn back to the upright position and remove the key.
- To unlock, reverse the direction. Never force a key that will not turn.
Maintenance
- Every 3–4 months, puff graphite powder or a dry PTFE lock spray into the keyway.
- Insert and turn the key a few times to spread the lubricant.
- Wipe the cylinder face with a dry cloth — avoid harsh cleaners on the finish.
- Check the fixing screw is still tight once a year.
Do ✔
- Keep 1–2 spare keys in a safe place away from the door.
- Replace the cylinder when you move into a new house or after a tenant leaves.
- Ask a key cutter to copy from the original key, not from a copy.
- Match the cylinder length to your door and handle plates.
Don't ✖
- Don't use cooking oil, grease or engine oil — they collect dust and jam the pins.
- Don't use the key as a handle to pull the door.
- Don't force a bent or worn key; get a new copy made.
- Don't leave a key in the inside of a glass-panelled door.
Where to Use the Kenyos LCE-06K
🏠 Homes & apartments
Main doors, kitchen and back doors, bedroom and store doors.
🏢 Offices
Office, file-room and boardroom doors that need key control.
🏪 Shops & stores
Shop front doors, stockrooms and small warehouse doors.
🏗️ New builds & rentals
Handover of new houses and re-keying between tenants.
Why Buy from Shabbiri Hardware?
- Trusted hardware supplier in Nairobi since 1990.
- Two branches on Magadi Road — Ongata Rongai and Tuala — easy for Rongai, Kiserian, Tuala, Karen, Langata and Kajiado buyers.
- Wide range of door locks, padlocks, cylinders, hinges and door hardware in one place.
- Bring your old cylinder and our staff will help you pick the right size.
- Retail and bulk supply for contractors, developers and landlords.
- We can share contacts of independent fundis and locksmiths if you need fitting.
Frequently Asked Questions
Will the Kenyos LCE-06K fit my existing door lock?
How many keys come with the cylinder?
Can I change the cylinder without changing the whole lock?
Should I oil my cylinder lock?
Do you install locks?
Where can I buy the Kenyos LCE-06K cylinder lock in Nairobi?
Visit Our Branches – Magadi Road, Nairobi
📍 Ongata Rongai Branch
Magadi Road, opposite Hashi Petrol Station, Ongata Rongai, Nairobi
📍 Tuala Branch
Magadi Road, past Nazarene University, Tuala, Nairobi
