
KWICK ADMIX IWL 210
Integral Waterproofing Liquid for Concrete, Mortar & Plaster
KWICK ADMIX IWL 210 is a liquid waterproofing admixture that you mix straight into concrete, mortar or plaster during batching. It makes the cement mix denser and less porous, so water cannot soak through — protecting slabs, walls, water tanks and foundations from dampness, leaks and seepage from the inside out.
📋 Product Specifications
| Product Name | KWICK ADMIX IWL 210 |
| Brand | KWICKFIX |
| Product Type | Integral liquid waterproofing admixture |
| Form | Liquid |
| Used With | Concrete, cement mortar, screed and plaster |
| Packaging | Sealed plastic tin (bucket) |
| Selling Unit | Per tin |
| Storage | Cool, shaded place, lid tightly closed, away from direct sun |
💧 How It Works
Ordinary concrete and plaster contain tiny pores and capillaries that pull water in. IWL 210 disperses evenly through the wet mix and blocks these pores while improving the workability of the mix. Because the protection is built into the whole thickness of the concrete or plaster — not just the surface — it does not peel off, wear away or need re-coating like a surface paint.
⭐ Key Benefits
- Reduces water absorption and permeability of concrete, mortar and plaster
- Prevents damp patches, efflorescence (white salt marks) and paint peeling on walls
- Improves workability, so the mix is easier to place, compact and finish
- Helps reduce shrinkage cracks for a stronger, longer-lasting structure
- Protects steel reinforcement from rust caused by water penetration
- Liquid form — measures and mixes easily, no lumps
- Economical: a small dose per bag of cement treats a large area
🏗️ Where to Use It
Flat concrete roofs, balconies and terraces exposed to rain.
Underground and overhead concrete tanks, sumps and reservoirs.
Footings, ground beams, basement walls and retaining walls.
Wet-area screeds and plaster before tiling.
Outside walls and parapets that face driving rain.
Concrete shells, fish ponds and drainage channels.
🛠️ How to Use
- Stir or shake the tin well before use so the liquid is uniform.
- Measure the correct dose for the amount of cement in your batch, following the dosage printed on the tin label.
- Add the measured IWL 210 to the mixing water first and stir.
- Use this treated water to mix your concrete, mortar or plaster as normal.
- Mix thoroughly so the admixture is spread evenly through the whole batch.
- Place, compact and finish the concrete or plaster as usual.
- Cure properly — keep the surface wet for at least 7 days for the best waterproofing result.
⚠️ Safety & Handling
- Wear gloves and safety goggles when handling
- If it gets into the eyes, rinse with plenty of clean water and seek medical advice
- Keep out of reach of children
- Do not mix with other admixtures unless advised by a technical professional
❓ Frequently Asked Questions
Can I use IWL 210 on an existing leaking wall or slab?
No. IWL 210 is added to fresh concrete or plaster while mixing. For existing structures, ask us about surface waterproofing coatings and membranes such as Sika products, which we also stock.
Do I still need to paint or tile over it?
Yes, you can paint or tile normally once the plaster or concrete has cured. IWL 210 does not affect paint or tile adhesion.
Is it suitable for drinking-water tanks?
Check the tin label and confirm with our team before using it in a potable water tank.
Do you deliver?
Yes. Same-day delivery within Nairobi and next-day delivery countrywide, on request. Free pickup is available at both branches.
Visit or Contact Shabbiri Hardware
Trusted hardware and building materials supplier since 1990 — two branches on Magadi Road.
📍 Ongata Rongai Branch
Magadi Road, opposite Hashi Petrol Station, Ongata Rongai
Specifications
| Model | ADMIX |
| Category | Waterproofing & Sealants |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



