
SIKA LATEX
SikaLatex® KE
SikaLatex® KE is a synthetic rubber emulsion made by Sika Kenya. You mix it into the water for cement slurries, plasters, screeds and repair mortars. It makes them stick better, crack less and keep water out.
Use it when you join new concrete to old, waterproof a water tank or bathroom, patch damaged concrete, or lay a hard-wearing floor screed.
📋Technical data
✅Why builders use it
Stronger bond
New plaster and concrete grip firmly onto old surfaces and do not peel off.
Water resistant
Lowers water absorption, so it suits tanks, basements, bathrooms and outside walls.
Fewer cracks
Adds flexibility and cuts shrinkage cracking in plasters and screeds.
Tougher surface
Better resistance to wear and abrasion on floors and steps.
Easier to work
Mortar spreads smoothly and holds together better on the trowel.
Economical
A little goes a long way, because it is always diluted with water.
🏗️Where to use it
- Bonding new to old: new concrete, plaster or screed onto an existing slab or wall.
- Waterproof plaster: water tanks, septic and soak pits, basements, bathrooms, balconies and parapet walls.
- Concrete repairs: patching broken edges, honeycombing, spalled columns and stair nosings.
- Floor screeds and toppings: thin, tough screeds over old floors.
- Tile bedding: improves grip of sand-cement mortar under floor and wall tiles.
🧪Mixing guide
First mix SikaLatex® KE with clean water to make the gauging liquid. Then use that liquid in place of plain water when mixing cement and sand. All parts are by volume.
1. Bonding slurry (bonding bridge)
Latex : Water = 1 : 1Slurry: 1 part cement + 1 part fine sand + 1 part gauging liquid.
Apply: brush well into the damp surface. Lay the new mortar or concrete while the slurry is still wet.
Coverage: about 4 m² from 1 kg SikaLatex® KE + 1 litre water + about 4 kg cement.
2. Waterproof plaster / render
Latex : Water = 1 : 2Mortar: 1 part cement + 3 parts clean, washed sand.
Apply: over a fresh bonding slurry, in 2 coats of about 8–10 mm each, working wet on wet.
3. Repair mortar / patching
Latex : Water = 1 : 2 to 1 : 3Mortar: 1 part cement + 2½ to 3 parts sand.
Apply: press firmly into the repair over a wet bonding slurry. Build deep repairs up in layers.
4. Floor screed / topping
Latex : Water = 1 : 3 to 1 : 4Mortar: 1 part cement + 3 to 4 parts sand.
Apply: lay onto a wet bonding slurry, compact well and finish with a trowel.
These are general guidelines from Sika's product data. For structural or large jobs, check the label on the pack and ask our team for the latest Sika data sheet.
🛠️How to apply, step by step
- Prepare the surface. Remove dust, oil, paint, loose plaster and rust. Hack smooth concrete so it is rough.
- Wet the surface. Soak it with clean water, but leave no standing puddles.
- Make the gauging liquid. Mix SikaLatex® KE and water in a clean bucket at the ratio for your job.
- Mix the mortar. Add the liquid to the cement and sand and mix 3–5 minutes until even and lump-free.
- Apply the bonding slurry with a stiff brush, then lay the plaster, screed or concrete before it dries.
- Cure it. Keep the work damp for at least 3 days. Cover it with wet hessian cloth (sold at our branches) or a curing compound.
- Clean tools with water straight away. Once set, the mix can only be scraped off.
⚠️Important tips
✔ Do
- Always dilute SikaLatex® KE with water first.
- Always add cement and sand to make the bonding slurry.
- Use clean, well-graded, washed sand.
- Work between 5 °C and 35 °C.
- Protect fresh work from strong sun and wind.
✖ Don't
- Don't brush neat latex, or only latex and water, onto the surface as a bond coat.
- Don't pour neat latex straight into a dry mortar mix.
- Don't add extra water to a mix that is stiffening.
- Don't let the bonding slurry dry before laying the mortar.
- Don't skip curing.
🧤Storage & safety
Store
Keep the tin tightly closed, in a cool, dry and shaded place. Protect from frost and heat.
Protect
Wear gloves and safety glasses. Wash any splashes off skin and eyes with plenty of water.
Keep away
Keep out of reach of children. Do not pour leftovers down drains.
❓Frequently asked questions
Can I use Sika Latex alone as a bonding coat?
No. Sika says never to use neat SikaLatex® KE, or a latex-and-water mix, as a bond coat. Always add cement and sand to make a slurry.
Is Sika Latex good for waterproofing a water tank?
Yes. A latex-modified cement plaster (gauging liquid 1 : 2, mortar 1 : 3) over a bonding slurry gives a water-resistant lining for tanks and pits.
How much area does 1 kg cover?
As a bonding slurry, 1 kg covers about 4 m². In plaster or screed, it depends on thickness and how much you dilute it. Send us your measurements and we will work it out.
Can I paint or tile over it?
Yes, once the plaster or screed has cured and dried properly.
Do you deliver?
Yes. Delivery is available on request, same day within Nairobi and next day countrywide.
📍Buy it at our branches on Magadi Road
Ongata Rongai Branch
Magadi Road, opposite Hashi Petrol Station
Tuala Branch
Magadi Road, past Nazarene University
💬 WhatsApp orders: 0745 554 008
✉️ Email: shabbirihardware@gmail.com
🌐 Website: shabbirihardware.co.ke
Shabbiri Hardware Kenya Limited, serving builders since 1990. Genuine Sika products only.
Specifications
| Brand | Sika |
| Category | Waterproofing & Sealants |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



