Loading branch status…
Home / Waterproofing & Sealants / SIKA LATEX - 5ltr
SIKA LATEX - 5ltr
Sika

SIKA LATEX - 5ltr

KSH 3,500/ tin
In stock
About this product
Genuine Sika · Made for Kenyan sites

SikaLatex® 5 Litre — Bonding Agent & Waterproofing Mortar Admixture

SikaLatex® is a white, milky synthetic rubber (styrene-butadiene) emulsion. You mix it with water to make a "gauging solution", then use that solution with cement and sand. The result is a bonding slurry that glues new concrete or plaster to old surfaces, and a stronger, more water-resistant mortar for plastering, screeds and repairs. It is suitable for hot and tropical conditions.

🧱 Bonding agent 💧 Water resistant 🛠️ Mortar admixture 📦 5 Litre tin
Product Details
BrandSika
Pack size5 Litre tin
Product typeStyrene-butadiene (SBR) emulsion
AppearanceWhite, milky liquid
DensityAbout 1.02 kg per litre
Chloride content0.1% or less — safe near steel
StorageCool, dry, shaded place; keep sealed
CategoryWaterproofing & Sealants
Where to Use SikaLatex®
🔗

Old to New Concrete

Bonding slurry between existing concrete and a new slab, topping or screed so they do not separate.

🧴

Plaster & Renders

Better grip of plaster on smooth walls and columns, with fewer cracks and less hollow-sounding patches.

🏠

Floor Screeds

Tougher, more wear-resistant screeds for floors, verandas, stairs and driveways.

🩹

Concrete Repairs

Patching broken edges, honeycombs, spalled beams and thin-layer repair mortars.

🚿

Wet Areas

Water-resistant renders for bathrooms, water tanks, basements, planters and external walls.

🧱

Tile & Masonry Beds

Improves adhesion of mortar beds for tiles, stone and blockwork.

Key Benefits
  • Strong bond between old and new concrete or mortar
  • Improves water resistance and lowers water penetration
  • Reduces shrinkage cracking in plaster and screeds
  • Better workability — mortar spreads more easily
  • Higher abrasion and wear resistance on floors
  • Better resistance to oils and many chemicals
  • Easy to use — simply mix with water, cement and sand
  • Works well in hot and tropical climates
Mixing Ratios

1. As a Bonding Slurry (Bonding Bridge)

1 SikaLatex : 1 Water

Mix the latex and water first. Then add cement (with or without fine sand) and stir to a creamy, lump-free slurry. As a guide, 1 litre SikaLatex + 1 litre water + about 4 kg cement covers roughly 4 m².

2. As a Mortar / Plaster / Screed Admixture

1 SikaLatex : 3 Water

Use this gauging solution in place of plain water. Typical mortar mix: 1 part cement to 2.5–3 parts sand. For higher water resistance, go stronger, up to 1 : 1.

How to Apply — Step by Step
  1. Prepare the surface. Remove dust, oil, paint, loose concrete and rust. Roughen smooth concrete so the slurry can grip.
  2. Pre-wet the surface. Soak it with clean water until it is damp but has no standing water.
  3. Make the gauging solution. Mix SikaLatex with clean water in the correct ratio in a clean bucket.
  4. Add cement and sand. Pour the solution into the dry mix slowly while stirring until smooth and lump-free.
  5. Brush on the bonding slurry. Scrub it firmly into the surface with a stiff brush.
  6. Apply mortar "wet on wet". Lay the new plaster, screed or concrete while the slurry is still wet — never let it dry first.
  7. Cure properly. Keep the work damp (wet hessian or a curing compound) to prevent early drying and cracks.

⚠️ Important — Read Before Use

  • Never brush neat SikaLatex, or latex mixed only with water, onto a wall or slab. Always add cement. Without cement it forms a white skin that peels off.
  • Always apply new mortar while the bonding slurry is still wet.
  • Use the slurry and mortar within their working time; do not re-mix with extra water once stiff.
  • Protect fresh work from strong sun and wind and keep it damp while curing.
  • Wear gloves and eye protection. Clean tools with water before the material hardens.
Frequently Asked Questions
Is SikaLatex a waterproofing product on its own?

No. It improves the water resistance of the mortar or render it is mixed into. For full tank or roof waterproofing, ask us about Sika cementitious or membrane systems.

How much area will 5 litres cover as a bonding slurry?

At the 1 : 1 latex-to-water ratio with about 4 kg cement per litre of latex, 5 litres covers roughly 20 m², depending on how rough and absorbent the surface is.

Can I use it for plastering over old painted walls?

Remove loose and glossy paint first and roughen the surface. The slurry must bond to sound material, not to paint.

Do you deliver?

Yes — same-day within Nairobi and next-day countrywide on request. You can also collect free from either branch.

Visit or Call Our Branches

📍 Ongata Rongai Branch

Magadi Road, opposite Hashi Petrol Station

🕗Open Monday to Saturday
Get Directions to Rongai →

📍 Tuala Branch

Magadi Road, Tuala — past Nazarene University

🕗Open Monday to Saturday
Get Directions to Tuala →
Online Orders & Enquiries

Need advice on the right Sika product?

Tell us your job — bonding, plastering, waterproofing or repair — and we'll recommend the right mix and quantity.

💬 Ask on WhatsApp More Waterproofing Products
KSH 3,500/ tin
In stock
Delivery on request — same-day within Nairobi, next-day countrywide.
Free pickupat Rongai & Tuala branches.
Qty
1
📲 Order on WhatsApp
100% genuine, sourced materials
Secure M-Pesa & card payment
Countrywide delivery arranged
100% Genuine
No fakes, ever
Quality assured
Trusted brands only
Countrywide delivery
Arranged on request
Expert advice
Sales team on WhatsApp

Specifications

BrandSika
CategoryWaterproofing & Sealants
AvailabilityIn stock
Sourced byShabbiri Hardware Kenya Limited

Customer reviews

No reviews yet — be the first to review this product.

Frequently bought together

Customers who bought this often add these to their order.