![MDF SCREW 1/2" [3.5X16] (200PCS IN A PACKET)](/products/mdf-screw-16-1793108623324.jpg)
MDF SCREW 1/2" [3.5X16] (200PCS IN A PACKET)
MDF Screw 1/2" (3.5 × 16 mm) — Packet of 200
A short, sharp, coarse-thread screw made for fixing into MDF, chipboard and particle board without splitting the board. Its countersunk head sits flush with the surface, and the yellow zinc coating protects it from rust inside kitchens, wardrobes and bathrooms. This is the screw fundis use for hinges, drawer runners, handles, back panels and small brackets.
Technical Specifications
Why Choose This Screw
Grips board firmly
The coarse, deep thread bites into soft board fibres and holds where an ordinary wood screw would strip out.
Reduces splitting
The sharp point and slim 3.5 mm shank enter cleanly, so board edges and faces stay intact.
Flush, neat finish
Nibs under the countersunk head cut their own seat, so the head sits level with laminated or painted surfaces.
Rust protection
Yellow zinc coating resists moisture in kitchens, bathroom vanities and coastal areas.
Where to Use It
- ✓Cabinet hinges — fixing concealed and flush hinges to kitchen and wardrobe doors.
- ✓Drawer runners & slides — ball-bearing and roller runners on 16 mm and 18 mm board sides.
- ✓Handles, knobs & catches — magnetic catches, door stops and small fittings.
- ✓Back panels — fixing 3 mm to 6 mm hardboard or MDF backs to cabinets and shelves.
- ✓Brackets & light fittings — shelf supports, corner plates and small angle brackets.
- ✓Small carpentry jobs — school projects, display stands, toy boxes and DIY repairs.
How to Fix Correctly
- Mark the position of the hinge, runner or fitting with a pencil.
- For screws into the edge of MDF, drill a 2 mm pilot hole first. Face fixing usually needs no pilot hole.
- Use a PZ2 or PH2 bit on a cordless drill set to a low clutch setting.
- Drive the screw straight in at a steady, slow speed until the head sits flush.
- Stop as soon as it is tight. Over-tightening strips the thread in MDF.
- Keep screws at least 10 mm from board edges and corners to avoid swelling or cracking.
Choosing the Right Length
| Job | Recommended screw |
|---|---|
| Hinges, runners, handles and back panels | 3.5 × 16 mm (1/2") — this product |
| Fixing thicker fittings onto 18 mm board | 3.5 × 25 mm (1") |
| Joining two boards (carcass assembly) | 4.0 × 40 mm to 4.0 × 50 mm |
Frequently Asked Questions
How many screws are in one packet?
Each packet contains 200 screws of 3.5 × 16 mm.
Can I use these screws on hardwood?
Yes, for light fittings, but drill a pilot hole first. They are designed mainly for MDF, chipboard and softwood.
Will they go through an 18 mm board?
No. At 16 mm long they are made for fixing items onto the board surface, so they will not come out the other side of 16 mm or 18 mm board.
Which screwdriver bit do I need?
A PZ2 (Pozi) bit gives the best grip. A PH2 (Phillips) bit also works.
Do you sell edge banding and boards too?
Yes. We stock MDF, chipboard, edge banding, hinges, runners and all cabinetry materials at both branches.
Do you deliver?
Yes. Same-day delivery within Nairobi and next-day countrywide on request, or free pickup at our Rongai and Tuala branches.
Visit Our Branches
Ongata Rongai Branch
Magadi Road, opposite Hashi Petrol Station, Ongata Rongai
Tuala Branch
Magadi Road, Tuala, past Nazarene University
Order or Ask a Question
Specifications
| Model | MDF SCREW 1/2 |
| Category | Screws |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



