NQ-9300 Neutral Silicone Sealant Sausage Clear, White and Black
A one-component, neutral-cure silicone sealant in a foil sausage pack, made for glazing, aluminium work, cladding panels and weather sealing. Fast cure and excellent adhesion, in stock at Shabbiri Hardware on Magadi Road, Ongata Rongai and Tuala.
Product Overview
NQ-9300 Neutral Silicone Sealant is a ready-to-use sealant that cures with moisture in the air to form a tough, flexible silicone rubber. Because the cure is neutral, it has a low odour and does not corrode aluminium, steel or galvanised sheet, and it does not attack concrete, stone or coated glass the way acetic (vinegar-smelling) silicone can.
It is supplied in a sausage pack, the format fundis and aluminium fabricators in Kenya prefer for big jobs: more sealant per pack than a cartridge, less packaging waste, and faster work with a sausage gun.
We stock this silicone in clear, white and black.
Technical Specifications
Cure, temperature and shelf-life figures are typical values for neutral-cure silicone sealants of this class. Always follow the instructions printed on the pack.
Key Benefits
Best Places to Use It
Not for aquariums, joints permanently under water, surfaces that will be painted, or structural glazing that carries load. For load-bearing glazing use a dedicated structural silicone.
How to Use NQ-9300 Neutral Silicone Sealant
Prepare the surface
Clean both sides of the joint. Remove dust, oil, grease, old sealant and loose material, then make sure the surface is completely dry.
Mask the edges
Run masking tape along both edges of the joint for a straight, clean line. On deep joints, push in a backer rod first so the sealant is about half as deep as the joint is wide.
Load the sausage gun
Unscrew the gun's front cap, slide the sausage into the barrel and cut off the clip at the front end. Fit the nozzle, screw the cap back on and cut the nozzle tip at an angle to match the joint width.
Apply the sealant
Hold the gun at about 45 degrees and push a steady, continuous bead into the joint so it fills fully with no air gaps.
Tool the joint
Smooth the bead with a spatula or tooling stick within a few minutes, before a skin forms. Press firmly so the silicone wets both sides of the joint.
Remove the tape and let it cure
Pull off the masking tape straight away, while the sealant is still wet. Keep the joint free of water and movement while it cures. Allow at least 24 hours, and longer for deep joints.
Work with good ventilation, avoid contact with skin and eyes, and keep out of reach of children. Wipe off wet sealant with a dry cloth; cured silicone has to be cut or scraped away.
Quantity Guide
Approximate joint length from one sausage of about 590 ml:
Allow roughly 10% extra for waste and uneven joints. Send us your joint sizes and total length and we will work out how many sausages you need.
Available Colours
Delivery and Collection
Collect from either branch on Magadi Road, in Ongata Rongai or Tuala. We also arrange delivery by customer location: boda delivery where reachable and courier service for upcountry orders. Delivery is charged according to distance.
Frequently Asked Questions
What colours does NQ-9300 come in?
We stock it in clear, white and black.
What is the difference between neutral and acetic silicone?
Neutral silicone cures without releasing acetic acid, so it has a low odour and does not corrode metals or attack concrete, stone and coated glass. Acetic silicone has a vinegar smell and is mainly for plain glass and glazed surfaces.
Which gun do I need for a silicone sausage?
A closed-barrel sausage gun, manual or pneumatic. A standard open-frame cartridge gun will not hold a sausage pack.
How long does it take to dry?
It typically skins in 10 to 30 minutes and cures about 2 to 3 mm of depth per day. Allow at least 24 hours before exposing the joint to water, and longer for deep joints or cold, dry weather.
Can I paint over it?
No. Paint does not bond to cured silicone, so pick the colour that suits the finished joint.
Is it suitable for outdoor use?
Yes. Neutral silicone resists sun, rain and temperature change, which is why it is used for windows, cladding and roofing joints.
Where can I buy NQ-9300 silicone in Nairobi?
At Shabbiri Hardware on Magadi Road in Ongata Rongai, opposite Hashi Petrol Station, and at our Tuala branch past Nazarene University.
Visit Shabbiri Hardware
Order NQ-9300 Neutral Silicone Sealant
Tell us the colour and the number of sausages you need. Wholesale and contractor quantities are welcome.
Order on WhatsApp: 0745 554008 Call 0741 042484 Email shabbirihardware@gmail.comWebsite: www.shabbirihardware.co.ke



