Pearl White Granite Countertop – Polished Natural Stone Kitchen Tops in Nairobi

Product Overview

Pearl White granite is a hard, dense natural stone quarried from igneous rock and polished to a mirror-like shine. Its fine, even speckled pattern keeps colour consistent across a full countertop run, which makes joints and long kitchen tops look seamless. The light tone opens up small kitchens and pairs well with white, grey, wood-grain, navy and black cabinets.

Whether you are fitting a new granite kitchen countertop in Nairobi, upgrading a bathroom vanity top, or finishing a bar counter, reception desk or window sill, Pearl White granite gives you the durability of natural stone with a bright, modern finish.

Technical Specifications

Key Features & Benefits

Applications

How to Use & Install Pearl White Granite

Granite should be cut and fitted by an experienced stone fabricator. Shabbiri Hardware supplies the material only; we can share contacts of independent installers on request.

1. Measure accuratelyMeasure the cabinet run, wall-to-wall lengths, sink and hob positions, and decide on overhang and edge profile. Allow for joints on long or L-shaped tops.
2. Prepare a level, rigid baseCheck that base cabinets are level and strong enough to carry stone. Fix cross-supports or a plywood sub-top where spans are long or overhangs are wide.
3. Cut with the right toolsUse a diamond blade with water cooling to prevent chipping and dust. Cut sink and hob openings with rounded inside corners to reduce the risk of cracks.
4. Finish the edgesGrind and polish exposed edges to the chosen profile so they match the polished top surface.
5. Lift and place carefullyCarry granite on its edge, never flat, with enough people to support its weight. Dry-fit the piece before bonding.
6. Bond and joinFix the top to the cabinets with a stone-compatible construction adhesive or neutral-cure silicone. Join sections with colour-matched stone epoxy, then level and polish the joint.
7. Seal the joints at walls and sinksRun a neat bead of neutral-cure, mould-resistant sanitary silicone along the splashback line and around sinks to keep water out.
8. Apply a stone sealerOnce clean and dry, apply a penetrating granite sealer for added stain protection, especially near the cooking and sink areas.

Care & Maintenance Tips

• Clean daily with warm water and a mild, pH-neutral soap; dry with a soft cloth for a streak-free shine.
• Wipe up oil, wine, juice, lemon and vinegar spills promptly to avoid marks.
• Avoid bleach, acid-based cleaners, scouring powders and steel wool.
• Use chopping boards for cutting and trivets under very hot pans.
• Re-apply granite sealer every one to two years, or when water stops beading on the surface.
• Do not stand or sit on unsupported overhangs or sink edges.

Why Buy Granite from Shabbiri Hardware?