
SIKA PLASTOCRETE
Sika® Plastocrete® N KE — Waterproof Concrete Admixture
A brown liquid added to the mixing water that makes concrete and mortar denser, easier to work and far more resistant to water. One admixture does two jobs: it waterproofs and it plasticises.
Product Overview
Sika Plastocrete N KE is a modified-lignosulphonate admixture made by Sika Kenya. Added at just 0.5% of the cement weight, it lets you use less water while keeping the mix workable. Less water means fewer pores and capillaries, so the finished concrete is stronger, shrinks less and stops water from seeping through.
It is the standard choice for Kenyan builders casting water tanks, foundations, basements, swimming pools and culverts, and for waterproof plaster and mortar. It works with all types of Portland cement sold in Kenya.
Key Benefits
Improved Watertightness
Blocks water penetration through the concrete itself — ideal for tanks and below-ground work.
Better Workability
A smoother, easier mix without adding extra water.
Denser Concrete
Easier compaction gives a dense mass and a superior surface finish.
Higher Strength
Lower water content means stronger, longer-lasting concrete.
Reduced Shrinkage
Fewer shrinkage cracks as the concrete dries and cures.
Protects Steel
Chloride-free, so it does not corrode reinforcement bars.
Where to Use It
How Much Do I Need?
| Cement used | Plastocrete needed |
|---|---|
| 1 bag (50 kg) | 250 g — about a quarter of the tin |
| 2 bags (100 kg) | 500 g — half a tin |
| 4 bags (200 kg) | 1 kg — one full tin |
| 10 bags (500 kg) | 2.5 kg — two and a half tins |
Based on Sika Kenya's recommended dosage of 0.5% by weight of cement. For large or structural pours, run a trial mix first.
How to Mix Sika Plastocrete
- 1
Measure the dose
Count your cement bags and measure 250 g of Plastocrete per 50 kg bag. Shake the tin well first.
- 2
Add it to the mixing water
Pour the measured Plastocrete into the gauging water and stir — before the water goes onto the cement and aggregates.
- 3
Reduce the water
The mix becomes more workable, so hold back some water to reach the same slump. Do not add extra water.
- 4
Mix thoroughly
Mix until the colour is uniform. A mechanical mixer gives the best, most even result.
- 5
Place, compact and cure
Pour and vibrate or rod well to remove air pockets. Keep the concrete wet for at least 7 days.
Technical Specifications
| Brand | Sika (Sika Kenya Limited) |
| Full product name | Sika® Plastocrete® N KE |
| Product type | Waterproofing & plasticising concrete admixture |
| Pack size | 1 kg tin |
| Composition | Modified lignosulphonate |
| Appearance | Brown liquid |
| Density | 1.06 ± 0.02 kg/L |
| pH | 5.5 – 7.5 |
| Chloride content | Chloride-free |
| Standard | ASTM C494 Type A |
| Dosage | 0.5% by weight of cement |
| Cement compatibility | All types of Portland cement |
| Shelf life | 12 months from date of production |
| Storage | 5 °C to 40 °C, out of direct sunlight |
Tips for Best Results
Do
- Measure the dose accurately for every batch
- Use a good mix design and clean aggregates
- Compact well to remove air pockets
- Cure with water for at least 7 days
Avoid
- Adding extra water to the mix
- Overdosing — it delays the initial set
- Disturbing concrete that is slow to set
- Storing the tin in direct sun or heat
Safety & Handling
Protect yourself
Wear gloves and goggles. Avoid prolonged skin contact; wash off with water.
If it reaches eyes or mouth
Rinse with clean water and get medical attention immediately.
Keep it clean
Keep away from food and utensils. Do not pour into water sources.
Frequently Asked Questions
How much Plastocrete do I use per bag of cement?
250 g per 50 kg bag, which is 0.5% of the cement weight. One 1 kg tin treats four bags.
Can I use it in plaster and mortar?
Yes. It improves the cohesiveness and watertightness of mortar, which makes it popular for plastering water tanks and wet walls.
What happens if I add too much?
The concrete will take longer to set, but it is not damaged. Leave it undisturbed and cure it properly.
Does it replace a waterproofing membrane?
It makes the concrete itself watertight. Where the design calls for a membrane or coating — for example on roofs or deep basements — use both together.
Is it safe for reinforced concrete?
Yes. It is chloride-free and does not attack steel reinforcement.
How long does it last in storage?
12 months from the date of production when stored between 5 °C and 40 °C away from direct sunlight.
Visit Our Branches
Ongata Rongai Branch
Tuala Branch
Building a water tank or foundation?
Tell us how many bags of cement you're using and we'll work out exactly how many tins you need.
Ask Us on WhatsAppSpecifications
| Brand | Sika |
| Category | Waterproofing & Sealants |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



