Loading branch status…
Home / Silicone Sealants & Fillers / Prestige P-829 Structural Sealant – Neutral Cure Weatherproof Silicone Sausage (Clear, White & Black)
📦
Prestige · Model P-829

Prestige P-829 Structural Sealant – Neutral Cure Weatherproof Silicone Sausage (Clear, White & Black)

KSH 480/ piece
In stock
About this product
Prestige P-829 Structural Sealant Kenya | Shabbiri Hardware
Prestige · Silicone Sealants · Construction Chemicals

Prestige P-829 Structural Sealant – Neutral Cure Weatherproof Silicone Sausage (Clear, White & Black)

A strong, flexible silicone for bonding and sealing glass, aluminium and alucobond panels on buildings in Kenya.

Product Overview

Prestige P-829 Structural Sealant is a one-component, neutral-cure silicone supplied in a sausage foil pack. It cures with moisture in the air into a tough rubber that holds glass, aluminium and cladding panels together while keeping rain, dust and wind out of the joint.

Fabricators and fundis in Nairobi use it for alucobond cladding, shopfronts, aluminium windows and doors, skylights and curtain walling. The sausage pack gives more sealant per pack than a cartridge and leaves less waste on site. It is available in clear, white and black.

Technical Specifications

Product name
Prestige P-829 Structural Sealant
Brand
Prestige (Prestige Plastic Products Ltd)
Type
One-component, neutral-cure silicone sealant, structural and weatherproof grade
Colours available
Clear, White and Black
Packaging
Sausage foil pack, applied with a closed-barrel sausage gun
Curing system
Moisture cure at room temperature, no mixing needed
Skin-over time
About 10 to 30 minutes at 25°C and 50% humidity
Cure rate
About 2 to 3 mm of depth per 24 hours
Full cure
7 to 14 days, depending on joint depth and weather
Application temperature
+5°C to +40°C, on a dry surface
Service temperature after cure
About −40°C to +150°C
Joint movement
About ±25% of joint width
Bonds to
Glass, anodised and powder-coated aluminium, alucobond (ACP) panels, steel, ceramic and most painted surfaces
Resistance
Rain, sunlight (UV), ozone and heat; stays flexible outdoors
Paintable
No
Shelf life
Usually 9 to 12 months unopened in a cool, dry store; check the date on the pack

Curing, temperature and movement figures are typical values for one-component neutral-cure structural silicone. Always confirm against the print on the pack and the manufacturer's data sheet for your project.

Key Features

  • Neutral cure: low odour and does not corrode aluminium, steel or coated glass the way acid (vinegar-smell) silicone can.
  • Structural strength: holds panels and glass in place as well as sealing the joint.
  • Weatherproof: stands up to Kenyan sun, heavy rain and daily temperature swings.
  • Stays flexible: moves with the building instead of cracking or peeling away.
  • Sausage pack: more sealant per pack, fewer changeovers and less plastic waste than cartridges.
  • Three colours: clear for glass joints, white for white frames and panels, black for dark frames and cladding.
  • Ready to use: no mixing and no hardener.

Where to Use

  • Alucobond and aluminium composite panel cladding joints
  • Aluminium windows, doors and shopfront frames
  • Glass-to-glass and glass-to-aluminium joints
  • Curtain walling and structural glazing
  • Skylights, canopies and glass roofs
  • Weather-sealing around frames, flashings and facade joints
  • Signage and metal fabrication work

Where Not to Use

  • Joints that will be painted, because paint does not hold on silicone.
  • Polyethylene, polypropylene, Teflon and bitumen surfaces, where silicone does not grip.
  • Joints that stay under water all the time, such as tanks, pools and aquariums.
  • Natural stone such as marble and granite without a stain test first.
  • Wet, dusty, oily or frost-covered surfaces.
  • Load-bearing structural glazing without joint sizing by a facade engineer and an adhesion test on the actual materials.

How to Use

  1. Clean both sides of the joint. Remove dust, oil, old sealant and loose paint, then wipe with a clean cloth and a suitable solvent and let it dry fully.
  2. Put masking tape along both edges of the joint for a neat line.
  3. For deep joints, push in a foam backer rod so the sealant depth is about half the joint width.
  4. Load the sausage into a sausage gun, cut one end of the foil, screw on the nozzle and cut the nozzle tip at an angle to match the joint width.
  5. Hold the gun at about 45 degrees and push a steady, unbroken bead into the joint so it fills right to the back.
  6. Smooth the bead with a spatula within 5 to 10 minutes, before the skin forms, pressing it against both sides.
  7. Pull off the masking tape straight away while the sealant is still wet.
  8. Leave the joint undisturbed. Keep panels and glass supported until the sealant has cured through, and allow 7 to 14 days before full load.

Coverage Guide

Bead length depends on joint size. To work it out, divide the pack volume in millilitres by the joint width times the joint depth in millimetres. The answer is in metres.

Worked example for a 600 ml sausage (check the volume printed on your pack):

  • 6 mm wide by 6 mm deep joint: about 16 metres per sausage
  • 10 mm wide by 6 mm deep joint: about 10 metres per sausage
  • 10 mm wide by 10 mm deep joint: about 6 metres per sausage

Add about 10% for wastage and send us your joint sizes and total length if you would like help with quantities.

Goes Well With

  • Alucoboards (aluminium composite panels) for cladding and signage
  • Sausage sealant guns and standard caulking guns
  • Akfix, Asmaco and Sika sealants, adhesives and PU foam for other joints on the same job

Shabbiri Hardware is supply-only. We do not install, but we can share contacts of independent installers on request.

Storage and Safety

  • Store unopened in a cool, dry place out of direct sun, below about 27°C.
  • Use an opened sausage as soon as possible, because it starts curing once the foil is cut.
  • Work in a ventilated area and avoid breathing the vapour while it cures.
  • Keep uncured sealant off skin and out of eyes. Wear gloves, and rinse eyes with plenty of water if contact happens.
  • Keep away from children. Not for food-contact or medical use.
  • Clean tools with a dry cloth or solvent while the sealant is wet. Cured silicone has to be cut or scraped off.

Frequently Asked Questions

What is Prestige P-829 structural sealant used for?

Bonding and weather-sealing glass, aluminium frames, alucobond cladding panels, shopfronts, skylights and similar building joints that stay outdoors.

Which gun do I need for a sausage sealant?

A closed-barrel sausage gun with a screw-on nozzle. A normal open cartridge gun will not hold a sausage pack.

Can I paint over it?

No. Paint does not hold on cured silicone. Pick clear, white or black to suit the job, or use a paintable acrylic or polyurethane sealant where the joint must be painted.

How long does it take to dry?

A skin normally forms in about 10 to 30 minutes and the bead cures roughly 2 to 3 mm in depth per day. Deep joints need one to two weeks to cure fully.

Is neutral cure better than acetic silicone?

For metal, coated glass and cladding, yes. Neutral cure has little smell and does not attack aluminium or coatings, which is why it is the usual choice for facade and structural work.

Where to Buy in Nairobi

Ongata Rongai Branch

Shabbiri Hardware Kenya Limited, Magadi Road, Ongata Rongai, opposite Hashi Petrol Station.

Open the Rongai branch in Google Maps

Tuala Branch

Shabbiri Hardware Kenya Limited, Magadi Road, Tuala, past Nazarene University.

Open the Tuala branch in Google Maps

Delivery is arranged by location and charged separately: boda delivery where reachable and courier for upcountry orders.

Ask for a Quotation

Tell us how many sausages you need or send your joint sizes, and we will reply with availability.

Call: 0741 042484
WhatsApp: 0745 554008
Email: shabbirihardware@gmail.com
Website: www.shabbirihardware.co.ke

WhatsApp us for a quotation Call 0741 042484
KSH 480/ piece
In stock
Delivery on request — same-day within Nairobi, next-day countrywide.
Free pickupat Rongai & Tuala branches.
Qty
1
📲 Order on WhatsApp
100% genuine, sourced materials
Secure M-Pesa & card payment
Countrywide delivery arranged
100% Genuine
No fakes, ever
Quality assured
Trusted brands only
Countrywide delivery
Arranged on request
Expert advice
Sales team on WhatsApp

Specifications

BrandPrestige
Model P-829
CategorySilicone Sealants & Fillers
AvailabilityIn stock
Sourced byShabbiri Hardware Kenya Limited

Customer reviews

No reviews yet — be the first to review this product.

Frequently bought together

Customers who bought this often add these to their order.