
DR. FIXIT PU SEALANT
Dr. Fixit PU Sealant — Flexible Polyurethane Joint Sealant
Dr. Fixit PU Sealant is a one-component, moisture-curing polyurethane sealant for sealing and waterproofing expansion, movement and construction joints. It cures into a tough, rubber-like seal that stretches and compresses as the building moves, so joints stay watertight through heat, rain and vibration.
It grips strongly to concrete, block, stone, plaster, metal and wood, and its non-sag paste works on floors, walls and overhead joints alike — ideal for contractors, fundis and homeowners across Nairobi and Kenya.
Technical Specifications
Why Choose Dr. Fixit PU Sealant
Watertight Seal
Blocks rain, leaks and seepage through joints and cracks.
Moves With the Joint
Low-modulus elastic seal handles expansion and contraction without cracking.
Strong Adhesion
Bonds to concrete, masonry, stone, metal, wood and most building materials.
Weather Resistant
Stands up to sun, rain and temperature changes outdoors.
Paintable
Can be painted over once fully cured to match walls and floors.
Easy to Apply
Ready to use straight from the sausage pack with a sealant gun.
Where to Use It
- Expansion & movement joints in concrete slabs
- Joints between precast concrete panels
- Roof slab, parapet and balcony joints
- Water tanks, gutters and drainage channels
- Gaps around door and window frames
- Floor joints in warehouses, garages and driveways
- Wall-to-floor and wall-to-ceiling joints
- Cracks and gaps in masonry and plaster
- Around pipes and service penetrations
- Pavement, walkway and parking joints
How Much Do I Need?
Approximate length of joint sealed by one 600 ml sausage (joint width × depth):
Quick formula: metres per sausage = 600 ÷ (joint width in mm × joint depth in mm). Add about 10% extra for wastage.
How to Apply — Step by Step
- Prepare the joint. Make sure it is clean, dry and sound. Remove dust, oil, loose material and old sealant with a wire brush or blower.
- Fit a backer rod. Push a foam backer rod into deep joints so the sealant depth is about half the joint width (never deeper than the width).
- Mask the edges. Apply masking tape along both sides of the joint for a clean, straight finish.
- Prime porous surfaces. On very porous or dusty concrete, use a suitable primer for stronger adhesion.
- Load the gun. Place the sausage in the sealant gun, clip one end, and fit and cut the nozzle to suit the joint width.
- Fill the joint. Gun the sealant steadily into the joint, pushing it firmly against both sides with no air gaps.
- Tool the surface. Smooth the sealant with a spatula or tooling tool before it skins, pressing it onto the joint walls.
- Remove tape and let it cure. Peel off the masking tape straight away. Avoid water and traffic until the sealant has cured.
Tips & Precautions
- Apply on dry surfaces only — moisture or standing water weakens adhesion.
- Curing is faster in warm, humid weather and slower in cold, dry weather.
- Clean tools and fresh spills with a solvent before the sealant cures; cured sealant can only be cut or scraped off.
- Wear gloves and work in a ventilated area. Keep out of reach of children.
- Not for continuous water immersion or glass glazing unless the manufacturer approves it.
- Store sealed in a cool, dry place away from direct sun. Use opened packs immediately.
- Test paint on a small area first before painting the whole joint.
Complete the Job — Also Available at Shabbiri Hardware
- Sausage sealant guns (manual)
- Foam backer rods for deep joints
- Masking tape and tooling spatulas
- Primers and other Dr. Fixit, Sika, Asmaco and Akfix waterproofing products
- Crown Paints to finish over cured sealant
Frequently Asked Questions
What is Dr. Fixit PU Sealant used for?
Sealing and waterproofing expansion, movement and construction joints in concrete, masonry, roofs, floors, tanks and around frames and pipes.
Can it be painted?
Yes. Once fully cured it can be painted over. Do a small test patch first.
Can I use it on walls and ceilings?
Yes. The non-sag paste stays in vertical and overhead joints without slumping.
Do I need a special gun?
Yes — a sausage-type sealant gun, available at both our branches.
Is it suitable for outdoor use?
Yes. It resists sun, rain and temperature changes, making it ideal for roofs, balconies and paving joints.
Do you deliver?
Yes, on request — same-day within Nairobi and next-day countrywide. Free pickup is available at our Rongai and Tuala branches.
Buy Dr. Fixit PU Sealant in Nairobi — Visit Us
Shabbiri Hardware Kenya Limited, trusted since 1990. Two branches on Magadi Road, ready to serve you.
📍 Ongata Rongai Branch
Address: Magadi Road, Ongata Rongai — opposite Hashi Petrol Station
Call: 0792 961 751
Get Directions📍 Tuala Branch
Specifications
| Brand | Dr Fixit |
| Category | Waterproofing & Sealants |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



