
Rosso Shingle Stone Coated Roof Tile – Brick Red Roofing Tiles in Kenya
Rosso Shingle Stone Coated Roof Tile – Brick Red Roofing Tiles in Kenya
A bold brick red shingle roof tile made from strong steel and finished with bonded natural stone chips. Built for Kenyan sun and rain, and stocked at Shabbiri Hardware on Magadi Road, Ongata Rongai and Tuala, Nairobi.
🏠Product Overview
The Rosso Shingle Roof Tile is a stone coated steel roofing tile in a classic brick red colour. Each tile combines the strength of a steel sheet with the natural look of a traditional clay or shingle roof, without the heavy weight. The stone-chip surface gives a rich, textured finish that keeps its colour, softens rain noise and helps protect the steel underneath.
It is a popular choice for residential houses, maisonettes, bungalows, villas, apartments, churches, schools and gate houses across Nairobi, Kajiado and the rest of Kenya, where homeowners want a premium red roof that lasts.
📐Technical Specifications
⭐Key Features & Benefits
Striking brick red finish
A warm, classic red that lifts curb appeal and suits modern and traditional homes.
Steel strength, light weight
Far lighter than concrete or clay tiles, so it needs a lighter roof structure and is easier to handle on site.
Stone-chip protection
Bonded stone granules shield the steel from sun, rain and hail and keep the colour looking fresh.
Rust & corrosion resistant
Made to resist rust and stand up to harsh Kenyan weather for long-lasting performance.
Quieter roof
The textured stone surface reduces the drumming noise of heavy rain compared with bare iron sheets.
Does not crack or break
Unlike clay or concrete tiles, steel tiles do not shatter when walked on carefully or during transport.
🏗Where to Use
- New residential roofs – bungalows, maisonettes, villas and townhouses
- Re-roofing old iron sheet, clay or concrete tile roofs
- Apartments, hotels, lodges and gated estates
- Churches, mosques, schools and institutional buildings
- Gate houses, gazebos, carports and verandas
🛠How to Use & Install
Measure the roof
Work out the total roof area in square metres for every slope. Use the "Tiles per m²" figure in the specifications to get your tile quantity, then add 5–10% for cutting at hips, valleys and edges.
Check the roof pitch and structure
Stone coated tiles suit pitched roofs; a minimum pitch of around 12° is generally recommended. Make sure rafters or trusses are straight, level and properly fixed.
Lay underlay and fix battens
Lay a roofing underlay over the trusses, then fix treated timber battens across the roof. Set the batten spacing to match the tile's width of cover from the specifications so each row sits evenly.
Start at the eaves
Begin with the bottom row at the eaves and work upward to the ridge. Hook each tile over its batten and overlap side laps neatly so water flows down and away.
Fix each tile securely
Nail or screw through the front lip of each tile into the batten using stone-coated roofing nails or screws, so every tile is held firmly against wind.
Cut and fit around edges
Cut tiles with tin snips or a tile cutter for hips, valleys, chimneys and gables. Fit valleys, barge boards, angle trims and ridge caps to finish and seal the roof.
Touch up and clean
Use a stone-coated touch-up kit on cut edges and nail heads, then sweep loose chips off the roof and gutters.
🧩Matching Accessories
Complete your Rosso roof with matching stone coated accessories available at both branches:
🧽Care & Maintenance
- Walk only on the lower part of the tiles, over the battens, wearing soft-soled shoes.
- Clear leaves and debris from valleys and gutters regularly so water drains freely.
- Inspect fixings after strong storms and touch up any scratched or cut areas.
- Avoid harsh chemicals or pressure washers that can strip the stone chips.
- Store tiles flat, dry and covered on site before installation.
❓Frequently Asked Questions
How many Rosso shingle tiles do I need?
Multiply your roof area in square metres by the tiles-per-m² figure in the specifications, then add 5–10% for cutting. Send us your roof measurements and we will work it out for you.
Are stone coated tiles better than iron sheets?
They look more premium, are quieter in the rain and hold their colour longer thanks to the stone-chip coating, while staying light like steel.
Do stone coated tiles rust?
They are designed to resist rust and corrosion. Touching up cut edges and nail heads during installation helps keep them protected for years.
Can I use Rosso tiles to replace an old roof?
Yes. Because they are light, they are a common choice for re-roofing over existing timber structures once the trusses are checked.
Do you install the roof?
We are supply-only, but we can connect you with independent roofing installers.
Do you deliver?
Yes – delivery on request: same-day within Nairobi and next-day countrywide. Free pickup is available at both branches.
📍Buy Rosso Roof Tiles at Our Branches on Magadi Road
Ongata Rongai Branch
Magadi Road, opposite Hashi Petrol Station, Ongata Rongai
Tuala Branch
Magadi Road, past Nazarene University, Tuala
🧱 Get a Quotation for Rosso Shingle Roof Tiles
Send your roof measurements or tile quantity and we will reply with a quotation the same day.
Specifications
| Brand | Decra |
| Model | Rosso |
| Category | Roofing Sheets |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



