
Shingle Roof Tile Sapphire Black – Stone Coated Steel Roofing Tile Kenya
Shingle Roof Tile – Sapphire Black Stone Coated Roofing Tile in Kenya
The Sapphire Black Shingle Roof Tile is a premium stone coated steel roofing tile with a deep, elegant black finish and a classic shingle look. It gives homes, maisonettes, bungalows and commercial buildings a modern, upmarket roof that resists rust, hail, heavy rain and fading — at a fraction of the weight of concrete or clay tiles. Buy genuine shingle roof tiles in Nairobi from Shabbiri Hardware, Magadi Road, serving builders since 1990.
Technical Specifications
| Specification | Detail |
|---|---|
| Product | Shingle Roof Tile – Stone Coated Steel |
| Colour | Sapphire Black |
| Profile | Shingle (Decra shingle design) |
| Overall length | 1340 mm |
| Overall width | 420 mm |
| Effective length of cover | 1280 mm |
| Effective width of cover | 375 mm |
| Roof cover per tile | 0.473 m² |
| Tiles per square metre | 2.1 |
| Base material | Aluminium-zinc coated steel |
| Surface finish | Natural stone chips bonded with acrylic resin, sealed with overglaze |
| Fixing | Nailed or screwed onto timber battens |
| Recommended roof pitch | Minimum 12° (steeper pitches drain best) |
| Matching accessories | Ridge, hip, barge board, angle trim, valley, flashing |
| Category | Roofing Sheets & Tiles |
Why Choose Sapphire Black Shingle Tiles
Rust & Corrosion Proof
Aluminium-zinc coated steel sealed under stone chips stays strong in rain, humidity and coastal air.
Rich Black Finish
A deep sapphire black that suits modern homes and keeps its colour for years under the Kenyan sun.
Hail & Storm Resistant
Interlocking tiles firmly fixed to battens hold up against strong winds and hailstorms.
Quiet in the Rain
The stone layer softens rain impact — far quieter than ordinary iron sheets.
Lightweight Roofing
Much lighter than concrete or clay tiles, so the roof structure costs less and goes up faster.
Low Maintenance
No repainting needed — the stone surface protects itself and keeps looking new.
Where to Use It
How Many Tiles Do I Need?
Formula: Roof area in square metres × 2.1 = number of tiles. Then add 5–10% for cutting at hips, valleys and edges.
Example: a roof of 150 m² needs about 315 tiles, plus around 25 extra for waste — order roughly 340 tiles. Send us your roof plan on WhatsApp and our team will work out the full list, including ridges and trims.
How to Install Shingle Roof Tiles
- Check the roof structure: make sure rafters and trusses are straight, level and treated against termites. Confirm the pitch is at least 12°.
- Lay the underlay: roll out a breathable roofing underlay over the rafters for extra waterproofing and heat insulation.
- Fix the timber battens: fix treated battens across the rafters at 375 mm centres so each row of tiles sits correctly.
- Start at the bottom: begin at the eaves and work up towards the ridge, laying tiles from one side across to the other.
- Overlap and interlock: overlap each tile on the one beside it and the row below, following the effective cover of 1280 mm by 375 mm.
- Fix firmly: nail or screw through the front lip into the batten using galvanised roofing nails or screws.
- Cut neatly: use tin snips or a guillotine at hips and valleys. Avoid angle grinders — sparks and heat damage the coating.
- Add accessories: finish with ridge cappings, hip, barge board, valley and flashing for a watertight roof.
- Touch up and clean: brush away loose chips and touch up cut edges with the matching touch-up kit.
Shabbiri Hardware supplies only and does not install. Ask us for contacts of independent roofing installers.
Care & Safety Tips
- Walk carefully: step on the lower part of the tile where it rests on the batten, wearing soft-soled shoes.
- Store flat: keep tiles flat, dry and off the ground before installation.
- Handle with gloves: edges can be sharp — always wear work gloves.
- Clean gutters: clear leaves and loose stone chips from gutters once a year.
Frequently Asked Questions
How many shingle roof tiles do I need per square metre?
About 2.1 tiles per square metre, plus 5–10% extra for cutting.
Will the Sapphire Black stone coated tiles rust?
No. The aluminium-zinc coated steel core is sealed under bonded stone chips, protecting it from rust and corrosion.
Are stone coated tiles noisy when it rains?
No — the stone chip layer softens rain impact, making them much quieter than plain iron sheets.
Do you have matching ridges and trims?
Yes — ridge cappings, barge boards, angle trims and other accessories are available at both branches.
Do you install the roof?
We supply only, but we can share contacts of trusted independent roofers.
Do you deliver?
Yes, delivery is arranged on request within Nairobi and countrywide, or collect free from our Rongai or Tuala branch.
Visit Our Branches on Magadi Road
Ongata Rongai Branch
Magadi Road, opposite Hashi Petrol Station, Ongata Rongai
Tuala Branch
Magadi Road, past Nazarene University, Tuala
Order Sapphire Black Shingle Roof Tiles Today
Send us your roof size or plan and get a full quotation for tiles and accessories the same day.
- Phone: 0741 042484
- WhatsApp: 0745 554008
- Email: shabbirihardware@gmail.com
- Website: www.shabbirihardware.co.ke
Specifications
| Brand | Decra |
| Model | Sapphire Black |
| Category | Roofing Sheets |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



