
SikaControl®-110 WT KE 5 Litres | Liquid Concrete Water Repellent Admixture Kenya
SikaControl®-110 WT KE — Liquid Waterproofing Admixture for Concrete
SikaControl®-110 WT KE (formerly known as Sika® Hydrofuge HSL) is a liquid mass water repellent that you mix straight into concrete and mortar. It reacts with the lime in cement to form tiny crystals that block the capillary pores, so water cannot soak through the concrete. The result is a waterproof concrete body from the inside out — ideal for foundations, water tanks, basements and any structure exposed to moisture.
Technical Specifications
| Brand | Sika® |
|---|---|
| Product name | SikaControl®-110 WT KE |
| Former name | Sika® Hydrofuge HSL |
| Type | Liquid mass water repellent for concrete and mortar |
| Appearance | Milky white to pale brown liquid |
| Density | 1.02 ± 0.02 kg/L |
| pH value | 9.0 ± 1.0 |
| Chloride ion content | ≤ 0.1% (chlorine-free) |
| Recommended dosage | 0.7% – 2.0% by weight of cement |
| Dosage with superplasticiser | 0.2% – 1.0% (when used with PCE or SNF-based admixtures) |
| Certification | CE marking according to EN 934-2 |
| Pack size (this listing) | 5 litre jerrican |
| Other pack sizes | 20 litre jerrican and 200 litre drum (ask in store) |
| Shelf life | 12 months from production in unopened original packing |
| Storage | +5 °C to +35 °C, sealed, away from direct sun and frost |
What This Product Does
Normal concrete is full of microscopic channels (capillaries). Water travels through them, causing dampness, peeling paint, rusting steel and leaking tanks. SikaControl®-110 WT KE seals these channels within the concrete itself, so the protection does not peel off, wear away or get damaged like a surface coating can.
Because it does not affect setting time or the strength of the concrete, you can use your normal mix design and site routine — simply add it to the mixing water.
Where to Use It
Key Benefits
- Waterproofs the whole concrete mass — not just the surface.
- Chlorine-free — safe for reinforced concrete; does not promote steel corrosion.
- No change to setting time or strength — work as you normally do.
- Easy to use — mix into the gauging water; no special equipment needed.
- Long-lasting protection — cannot peel, crack off or wash away like surface paints.
- Compatible with many other Sika admixtures (trial mix recommended).
- Made in Kenya by Sika — consistent, certified quality.
Dosage Guide — How Much Do I Need?
Dosage is based on the weight of cement in the mix. For one standard 50 kg bag of cement:
One 5 litre jerrican treats about 5 to 14 bags of cement, depending on the dosage chosen. For a water tank or basement, use the higher end of the range. Always do a small trial mix to confirm the right dosage for your materials.
How to Use — Step by Step
- Stir the jerrican slowly before opening to get a smooth, lump-free liquid.
- Measure the dose according to the amount of cement in your batch (see the dosage guide above).
- Dilute in the mixing water and stir gently. You may also add it directly into the mixer, as long as the batch is mixed thoroughly.
- Mix the concrete or mortar as normal until the colour and consistency are even.
- Place and compact well — use a vibrator or tamp properly to remove air pockets and honeycombing.
- Cure properly — keep the concrete moist for at least 7 days (water curing, wet hessian cloth or a curing compound).
Important Notes
- Follow good concreting practice — a correct mix design, low water content, good compaction and proper curing are essential for watertight concrete.
- The admixture does not seal cracks or poorly compacted concrete. Treat construction joints and cracks with suitable Sika joint and repair products.
- Run a trial mix whenever you combine it with other admixtures.
- Wear gloves and eye protection. Wash splashes off skin with water. Keep out of reach of children.
- Store sealed, out of direct sunlight, and protect from frost.
Frequently Asked Questions
Is SikaControl-110 WT KE the same as Sika Hydrofuge?
Yes. It is the new name for the product previously sold in Kenya as Sika Hydrofuge HSL.
Can I use it for a concrete water tank?
Yes. It is designed for water-retaining structures such as tanks and reservoirs. Use a good mix design, compact well and cure for at least 7 days.
Will it make my concrete weaker or slow down setting?
No. It has no impact on setting time or mechanical strength when used at the recommended dosage.
Can I use it in plaster and mortar?
Yes. It works in both concrete and cement mortar, including external renders and wet-area screeds.
Is it safe for reinforced concrete?
Yes. It is chlorine-free, so it will not encourage corrosion of steel reinforcement.
Do you deliver?
Yes. We deliver within Nairobi and arrange delivery countrywide. You can also collect from our Rongai or Tuala branch.
Where to Buy SikaControl-110 WT KE in Nairobi
Available at Shabbiri Hardware Kenya Ltd — trusted hardware and building materials supplier since 1990, with two branches along Magadi Road.
Ongata Rongai Branch
Location: Magadi Road, Ongata Rongai — opposite Hashi Petrol Station
Phone: 0792 961 751 / 0741 042 484
Get directions on Google Maps →Tuala Branch
Location: Magadi Road, Tuala — past Nazarene University
Phone: 0741 393 113
Get directions on Google Maps →Need Advice or a Bulk Quote?
Online orders and enquiries on WhatsApp: 0745 554 008
Specifications
| Brand | Sika |
| Model | Sika-control110-5L |
| Category | Waterproofing & Sealants |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



