Loading branch status…
Home / Waterproofing & Sealants / DR. FIXIT SUPER LATEX (SBR)
DR. FIXIT SUPER LATEX (SBR)
Dr Fixit

DR. FIXIT SUPER LATEX (SBR)

KSH 950/ tin
In stock
About this product
Waterproofing & Bonding

Dr. Fixit 302 Super Latex (SBR) — Waterproofing & Repair Bonding Agent

Dr. Fixit 302 Super Latex is a milky-white SBR (Styrene Butadiene Rubber) latex by Pidilite. You mix it with cement, sand and water to make cement slurries, plasters and repair mortars that bond stronger, resist water and crack less.

It is the go-to additive for leaking roofs, terraces, bathrooms, water tanks and for joining new concrete or plaster to old surfaces.

SBR polymer latexMixes with cementRoofs & wet areasRepairs & bonding
📋

Technical Specifications

PropertyDetails
BrandDr. Fixit (Pidilite Industries)
Product code302 Super Latex
TypeSBR (Styrene Butadiene Rubber) latex, cement additive
AppearanceMilky white liquid
Pack size1 kg tin
CoverageAbout 70 – 80 sq ft per kg in 2 coats (waterproofing slurry)
Mixes withOrdinary Portland cement, sand, water
Suitable surfacesConcrete, block and brick masonry, stone, plaster, screed
Country of originIndia
StorageCool, shaded place; keep tin closed; protect from freezing
✅

Key Benefits

Stops leakage & dampnessMakes cement coats water-resistant on roofs, walls and floors.
Strong bondingSticks to concrete, masonry, stone, plaster, steel and asphalt.
Fewer cracksImproves flexibility and cuts drying and shrinkage cracks.
Stronger repairsRepair mortar grips well and does not fall back — less waste.
Hard, dust-free surfaceRaises abrasion and erosion resistance of the cement mix.
Protects steelDense mortar helps guard reinforcement against corrosion.
🏗️

Where to Use It

Roof slabs & terracesBathrooms & toiletsKitchens & balconiesWater tanksBasement wallsSunken slabsBonding new to old concretePlaster & screedConcrete patch repairsCrack fillingFloor toppingsDamp walls
🧪

Mixing Guide

Waterproof coating1 : 4 : 7Super Latex : Water : Cement — brush on 2 coats
Bonding slurry coat1 : 1Diluted latex : Cement — apply just before new plaster or concrete
Repair mortar / plaster1 : 3 mixCement : Sand, gauged with diluted latex in place of plain water

Ratios are by weight and are a guide. Always follow the instructions printed on the tin.

🖌️

How to Apply

  1. Clean the surface. Remove dust, oil, loose plaster and old paint. Open up and clean any cracks.
  2. Wet the surface. Soak it with water, then remove standing water so it is damp but not wet.
  3. Dilute the latex. Mix Super Latex with clean water in a clean bucket at the ratio you need.
  4. Add cement slowly. Stir continuously until you get a smooth, lump-free slurry.
  5. Apply the first coat. Use a stiff brush, working the slurry into the surface and cracks.
  6. Apply the second coat. Once the first coat is touch-dry (about 4–6 hours), brush the second coat at right angles to the first.
  7. Cure properly. Keep moist-cured for at least 3 days. Protect from rain and direct sun during curing.
⚠️

Precautions

  • Use the mix within about 30 minutes; do not add more water once it starts to set.
  • Never use the latex neat on its own as a final coat — always mix with cement.
  • Do not apply in heavy rain or on very hot, dry surfaces.
  • Wear gloves and eye protection; wash tools with water straight after use.
  • Keep out of reach of children.
❓

Frequently Asked Questions

How much area does one tin cover?

About 70–80 sq ft in 2 coats when mixed as a waterproof coating. For a roof or terrace, measure the area and we will work out how many tins you need.

Can I paint or tile over it?

Yes. Once fully cured, you can tile, screed or paint over the latex-cement coat.

Is it suitable for water tanks?

Yes, it is widely used to waterproof concrete and masonry tanks. Clean and fully cure before filling.

Does it replace a membrane on large roofs?

It is ideal for small to medium areas and repairs. For large flat roofs, ask us about full membrane systems.

Do you install it?

We supply materials only, but we can share contacts of trusted independent fundis.

⭐

Why Buy from Shabbiri Hardware?

  • Trusted hardware and building materials supplier since 1990.
  • Genuine Dr. Fixit, Sika, Asmaco and Akfix construction chemicals.
  • Two branches on Magadi Road — Ongata Rongai and Tuala.
  • Friendly advice on the right product and quantity for your job.
📍

Visit Our Branches

Ongata Rongai Branch

Magadi Road, opposite Hashi Petrol Station

Tuala Branch

Magadi Road, past Nazarene University

Contact Us

💬 Ask About This Product on WhatsApp
KSH 950/ tin
In stock
Delivery on request — same-day within Nairobi, next-day countrywide.
Free pickupat Rongai & Tuala branches.
Qty
1
📲 Order on WhatsApp
100% genuine, sourced materials
Secure M-Pesa & card payment
Countrywide delivery arranged
100% Genuine
No fakes, ever
Quality assured
Trusted brands only
Countrywide delivery
Arranged on request
Expert advice
Sales team on WhatsApp

Specifications

BrandDr Fixit
CategoryWaterproofing & Sealants
AvailabilityIn stock
Sourced byShabbiri Hardware Kenya Limited

Customer reviews

No reviews yet — be the first to review this product.

Frequently bought together

Customers who bought this often add these to their order.