
SIKA TOP SEAL COMPOUND (A) & (B)
SikaTop® Seal-107 — Flexible Cementitious Waterproofing Slurry
A two-part, polymer-modified cement coating that seals concrete and masonry against water, damp and salts — the trusted base layer under tiles in bathrooms, balconies and water tanks.
SikaTop® Seal-107 is a ready-to-mix waterproofing system made of a liquid polymer (Component A) and a cement-based powder (Component B). Once mixed, it forms a smooth slurry that is brushed or troweled onto damp concrete, plaster, screed or blockwork.
It cures into a dense, slightly flexible coating that stops water passing through the surface, protects concrete from carbonation and chlorides, and gives tile adhesive a strong surface to grip. It is one of the most used waterproofing products on Kenyan building sites.
Key Benefits
Truly waterproof
Dense polymer-cement film keeps water out of slabs, walls and tanks.
Slightly flexible
Polymer content helps it move with the substrate and resist fine cracking.
Excellent bond
Sticks firmly to concrete, mortar, plaster and blockwork without a separate primer.
Pre-dosed kit
Both parts come measured in one set — no guesswork on site.
Protects concrete
Shields steel reinforcement from moisture, salts and carbon dioxide.
Tile-ready surface
Ideal base for tile adhesive, screed or paint after curing.
Where To Use It
What's In The Set
White milky liquid that gives flexibility, adhesion and water resistance.
Grey blend of cement, graded fine sand and additives.
Technical Data
| Product type | Two-component polymer-modified cementitious slurry |
|---|---|
| Colour | Grey |
| Mixing ratio | A : B = 1 : 4 by weight (slurry / brush) |
| Fresh mix density | About 2.1 kg per litre |
| Consumption | About 1.5 – 2.0 kg/m² per coat |
| Coats required | Minimum two, applied crosswise |
| Pot life | About 30 minutes at 27 °C (shorter in hot weather) |
| Application temperature | +8 °C to +40 °C |
| Over-painting | After at least 7 days of curing |
| Shelf life | 12 months unopened, stored dry, cool and shaded |
How To Apply
- 1
Prepare the surface
Remove dust, oil, loose plaster and old paint. Fill holes and honeycombing with repair mortar. Round off sharp internal corners.
- 2
Pre-wet
Soak the surface with clean water so it is damp but has no standing water.
- 3
Mix
Shake Component A, pour it into a clean bucket, then add Component B slowly while mixing with a drill paddle for about three minutes until smooth and lump-free.
- 4
First coat
Brush the slurry firmly into the surface with a stiff masonry brush, working it into pores and corners.
- 5
Second coat
Once the first coat is firm but still slightly damp (usually a few hours), apply the second coat at right angles to the first.
- 6
Cure & protect
Keep it damp and shaded with wet hessian or plastic sheet. Protect from rain and foot traffic for at least a day before tiling or screeding.
Pro Tips
✔ Do
- Mix the full set at once so the ratio stays correct
- Run the coating up walls in showers and on balcony upstands
- Seal pipe penetrations and corners carefully
- Work in the cooler part of the day
✘ Don't
- Add extra water to a mix that is stiffening
- Apply on dry, dusty or frozen surfaces
- Leave it exposed as a walking surface
- Apply in direct midday sun or rain
Safety & storage: Contains cement — wear gloves and eye protection, avoid skin contact and wash splashes off with water. Store both parts off the floor in a dry, shaded place and protect the liquid from freezing and strong heat.
Frequently Asked Questions
Can I fix tiles directly on SikaTop Seal-107?
Yes. After curing, it makes an excellent base for cement-based tile adhesive. This is the standard method for bathrooms and balconies.
Can I use it on a flat concrete roof?
Yes, as a waterproof layer under screed or tiles. For roofs left exposed to sun and foot traffic, ask our team about a suitable top protection layer.
Is it good for water tanks?
Yes, it is widely used inside concrete and masonry tanks. Let it cure fully and flush the tank with clean water before filling.
How many sets do I need?
Divide your area in square metres by seven for a quick estimate, then round up. Send us your measurements on WhatsApp and we will calculate it for you.
Do you install it?
We supply genuine materials only, but we can connect you with experienced independent applicators.
Do you deliver?
Yes — delivery is available on request within Nairobi and countrywide, or collect from either branch.
Why Buy From Shabbiri Hardware
- Genuine Sika products from authorised supply
- Serving builders since 1990
- Two branches on Magadi Road
- Expert advice on quantities and application
Visit Our Branches
Ongata Rongai Branch
Magadi Road, opposite Hashi Petrol Station
Tuala Branch
Magadi Road, past Nazarene University
📧 shabbirihardware@gmail.com
💬 WhatsApp orders: 0745 554 008
Specifications
| Brand | Sika |
| Category | Waterproofing & Sealants |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



