Wall to Ceiling Skirting Cornice 3m | Decorative Ceiling Cornice & Wall Skirting Kenya

The Wall to Ceiling Skirting Cornice 3m is a decorative ceiling finishing profile used to cover the joint between walls and ceilings. It helps hide gaps, rough edges and uneven ceiling lines while giving interiors a clean and elegant finish. Ideal for homes, offices, shops, hotels and commercial interiors. Available at Shabbiri Hardware in Ongata Rongai and Tuala, with delivery across Kenya.

Uses 

Wall-to-Ceiling Finishing:
Used to cover the joint where the wall meets the ceiling for a clean professional finish.

Ceiling Edge Decoration:
Adds a decorative border around ceilings, improving the final interior appearance.

Hiding Gaps & Uneven Edges:
Helps cover small cracks, rough plaster lines, ceiling board edges and imperfect joints.

Interior Renovation:
Perfect for upgrading old rooms, rental units, offices and commercial spaces.

Gypsum & Ceiling Board Projects:
Can be used with gypsum ceilings, ceiling boards and interior wall finishes.

Residential & Commercial Interiors:
Suitable for living rooms, bedrooms, corridors, offices, shops, hotels, salons, schools and clinics.

Benefits

Clean Wall-to-Ceiling Finish:
Creates a neat transition between the wall and ceiling.

Decorative Interior Look:
Improves room appearance with a stylish ceiling border.

3 Metre Length:
Long 3m profile helps reduce many joints and gives a cleaner finish.

Paintable Surface:
Can be painted to match ceiling or wall colours.

Easy Installation:
Can be fixed using suitable adhesive, nails or screws depending on the surface and installer method.

Covers Imperfections:
Helps hide gaps, uneven plaster, ceiling edges and small joint defects.

Suitable for Many Interiors:
Works well in homes, offices, shops, hotels and commercial buildings.

Technical Specifications

How to Use / Installation Guide

1. Measure the Room Perimeter
Measure the full length around the room where the cornice will be installed.

Formula:
Total wall perimeter ÷ 3m = number of cornice pieces required

Add 5–10% extra for cutting, corners and wastage.

2. Prepare the Surface
Make sure the wall and ceiling edges are dry, clean, firm and free from dust, loose paint or oil.

3. Mark the Installation Line
Use a pencil and level line to mark where the cornice will sit. This helps keep the installation straight.

4. Cut the Corners
For inside and outside corners, cut the cornice carefully at the correct angle. A mitre box or proper cutting tool helps achieve clean corner joints.

5. Apply Adhesive
Apply suitable construction adhesive on the back edges of the cornice where it will touch the wall and ceiling.

6. Fix the Cornice in Position
Press the cornice firmly into place along the wall-to-ceiling joint. Hold until it grips properly. Nails or screws may be used depending on the installer’s method and surface type.

7. Fill Joints and Gaps
Use filler or joint compound to close small gaps, corner joints and nail/screw points.

8. Sand Lightly
After the filler dries, sand lightly for a smooth surface.

9. Prime and Paint
Apply primer if needed, then paint to match the ceiling, wall or preferred interior design.

10. Final Check
Confirm all pieces are straight, corners are neat, joints are smooth and the final finish looks clean.

Important Installation Tips

Measure the room before buying to avoid shortage.

Cut corners carefully for a professional finish.

Use the correct adhesive for the surface.

Do not install on wet, dusty or weak surfaces.

Fill and sand joints before painting.

For best results, use an experienced ceiling or finishing fundi.

Maintenance

Wipe dust using a soft dry cloth.

Avoid direct water exposure.

Repaint when necessary to refresh the finish.

Inspect corner joints occasionally for cracks or gaps.

Repair damaged sections early to maintain a neat look.

Store & Delivery Info

Main Branch: Magadi Road, Ongata Rongai, Nairobi**
Tuala Branch: Past Nazarene University, Tuala

Call/WhatsApp: 0745 554008 / 0741 042484
Email: info@shabbirihardware.com

Countrywide Deliveries Available:
Nairobi, Mombasa, Kisumu, Nakuru, Eldoret, Thika, Naivasha, Kakamega, Bungoma, Kericho, Kitale, Machakos, Meru, Embu, Isiolo, Nanyuki, Malindi, Voi, Garissa and more.