Loading branch status…
Home / Fiber Cement Boards / Fiber Cement Eaves Vent Board 4mm × 600mm × 1200mm
NEWFiber Cement Eaves Vent Board 4mm × 600mm × 1200mm

Fiber Cement Eaves Vent Board 4mm × 600mm × 1200mm

KSH 950/ piece
In stock
About this product
Fiber Cement Boards

Fiber Cement Eaves Vent Board 4mm × 600mm × 1200mm

A light cement board with ready-made ventilation slots, made for closing the underside of your roof overhang (the eaves, also called the soffit) while still letting air move through.

The slots let hot, damp air escape from the roof space, which helps keep the house cooler and protects roof timbers from moisture. The board itself does not rot, rust or get eaten by termites, so it lasts outdoors where timber and soft boards fail.

It is supplied plain grey (uncoloured), ready to paint to match your fascia or walls. Available from Shabbiri Hardware Kenya at our Ongata Rongai and Tuala branches, with delivery arranged across Kenya.

Technical Specifications

ProductFiber cement eaves vent board
ModelFCEVB-4MM
Thickness4mm
Board size600mm × 1200mm (2ft × 4ft)
Coverage per board0.72 m², or 1.2 running metres of eave up to 600mm wide
MaterialCement reinforced with fibres
VentilationFactory-made vent slots across the board
SurfaceSmooth, flat face
ColourNatural cement grey (uncoloured)
Finish optionsPaint (exterior grade)
Suitable forRoof eaves, soffits, verandah and porch ceilings
Approximate weightAbout 4 kg per board
Selling unitPer piece (one board)

Key Benefits

  • Ventilates the roof space. The slots let trapped heat and moisture out, helping rooms below stay cooler.
  • Protects roof timbers. Moving air reduces damp, mould and rot in rafters and trusses.
  • Keeps birds and bats out. The eave is closed off neatly, with only narrow slots left open for air.
  • Made for outdoor use. It does not rot, swell, rust or attract termites.
  • Does not burn. Cement board is non-combustible.
  • Light and easy to fix. One person can lift and fit a board overhead.
  • Neat, paintable finish. Gives the roof edge a clean, finished look in any colour.

Best Places to Use It

  • Under roof eaves and overhangs on houses, apartments and commercial buildings
  • Soffits on mabati, tile and stone-coated roofs
  • Verandah, porch and balcony ceilings
  • Carports, walkways and covered corridors
  • Gazebos, kiosks, guard houses and site offices
  • Replacing old, rotten or sagging timber and soft-board eaves
Good to know: Vent boards are often mixed with plain boards along the eave. For closed ceilings inside the house, use a plain smooth board instead.

How to Install

  1. Prepare the frame. Fix a straight, level timber or steel frame under the eave. Supports should be no more than 400–450mm apart, with a support under every board edge.
  2. Measure the eave. Check the width of the overhang. If it is narrower than 600mm, mark the board for trimming.
  3. Cut if needed. Score the board deeply with a scoring knife along a straight edge and snap it, or use a grinder with a diamond blade. Wear a dust mask and eye protection.
  4. Pre-drill the holes. Drill fixing holes at least 12mm in from the edges and 50mm from the corners. Do not fix through the vent slots.
  5. Fix the board. Use fibre cement nails or corrosion-resistant screws about 200mm apart. Tighten gently, as over-driving can crack a thin board.
  6. Leave a small gap. Keep 2–3mm between boards, or use PVC or aluminium jointing strips for a neat line.
  7. Prime and paint. Apply an alkali-resistant primer, then two coats of exterior paint. Take care not to block the slots with thick paint.
Handling tip: The board is thin, so carry it on its edge, do not bend it, and store boards flat, off the ground and under cover.
Please note: We supply the boards only. We do not install, but we can share contacts of independent installers on request.

How Many Boards Do You Need?

Each board is 1.2m long, so one board closes 1.2 running metres of eave (for overhangs up to 600mm wide).

  • Measure the total length of eave around the roof, in metres.
  • Divide that length by 1.2.
  • Add about 10% extra for corners, cutting and breakage, then round up to the next full board.
Example: A house with 40 metres of eave: 40 ÷ 1.2 = 33.3 boards. Add 10% = 36.7, so order 37 boards.

For verandah ceilings, work by area instead: divide the ceiling area in m² by 0.72 and add 10%. Not sure? Send us your measurements on WhatsApp and we will calculate it for you.

Available Options

This page is for the 4mm eaves vent board. We also stock:

  • Smooth fiber cement boards (1200mm × 2400mm) in several thicknesses for ceilings, walls and partitions
  • V-grooved fiber cement boards for a decorative panelled look
  • PVC ceiling panels as an alternative finish for verandah ceilings

Primers, exterior paint and sealants to finish the job are available at both branches.

Delivery and Collection

  • Collect from our branches. Pick up free of charge from Ongata Rongai or Tuala, both on Magadi Road.
  • Delivery on request. We arrange delivery to your site in Nairobi and across Kenya. The delivery charge depends on your location and the number of boards.
  • Transport with care. Boards are thin and must travel flat and well supported so they do not crack.
  • Easy payment. Pay by M-Pesa Paybill, bank or card.

Frequently Asked Questions

What is an eaves vent board?

It is a cement board with slots cut into it. It is fixed under the roof overhang to close the gap between the wall and the roof edge, while the slots allow air to flow into and out of the roof space.

Why do eaves need ventilation?

Without airflow, heat and moisture build up under the roof. This makes the house hotter and can cause mould and rot in the roof timbers. Vent boards let that air escape.

Will rain get in through the slots?

The board faces downwards under the overhang, so rain does not normally reach the slots.

Will insects get in?

The slots are narrow enough to keep out birds and bats. Small insects can still pass, so if that is a concern, fix a fine insect mesh behind the board.

Can I paint it?

Yes. Prime with an alkali-resistant primer, then use exterior paint. We stock Crown Paints and can mix any colour you need.

Do I need vent boards all the way round?

Not always. Many builders alternate vent boards with plain boards. Your fundi or roofer can advise on the right mix for your roof.

How do I cut it?

Score it deeply with a scoring knife and snap it over a straight edge, or use a grinder with a diamond blade. Wear a dust mask.

Is it strong enough for a ceiling?

Yes, for eaves and verandah ceilings where nothing rests on it. It is not a load-bearing board, so do not walk on it or hang heavy fittings from it.

Do you deliver outside Nairobi?

Yes. We arrange delivery countrywide. Send us your location and quantity on WhatsApp for a delivery quote.

Visit or Call Our Branches

Ongata Rongai Branch

Location: Magadi Road, Ongata Rongai, opposite Hashi Petrol Station

Call: 0792 961 751 or 0741 042 484

Open in Google Maps

Tuala Branch

Location: Magadi Road, Tuala, past Nazarene University

Call: 0741 393 113

Open in Google Maps

Online orders and enquiries: WhatsApp 0745 554 008  |  Email shabbirihardware@gmail.com  |  www.shabbirihardware.co.ke
KSH 950/ piece
In stock
Delivery on request — same-day within Nairobi, next-day countrywide.
Free pickupat Rongai & Tuala branches.
Qty
1
📲 Order on WhatsApp
100% genuine, sourced materials
Secure M-Pesa & card payment
Countrywide delivery arranged
100% Genuine
No fakes, ever
Quality assured
Trusted brands only
Countrywide delivery
Arranged on request
Expert advice
Sales team on WhatsApp

Specifications

ModelFCEVB-4MM
CategoryFiber Cement Boards
AvailabilityIn stock
Sourced byShabbiri Hardware Kenya Limited

Customer reviews

No reviews yet — be the first to review this product.

Frequently bought together

Customers who bought this often add these to their order.