Loading branch status…
Home / Fiber Cement Boards / Fiber Cement Smooth Board 8mm × 1200mm × 2400mm
NEWFiber Cement Smooth Board 8mm × 1200mm × 2400mm

Fiber Cement Smooth Board 8mm × 1200mm × 2400mm

KSH 3,650/ piece
KSH 4,000Save 9%
In stock
About this product
Fiber Cement Boards · 8mm

A Strong, Paintable Board for Walls and Partitions

The 8mm fiber cement smooth board is a tough, flat board made from cement and fibres. It is thick enough to build firm walls and partitions, and its smooth face is ready to paint.

Each board is a full 8ft × 4ft sheet (1.2m × 2.4m) and covers 2.88 square metres. It is supplied plain grey (uncoloured).

It does not rot, swell or attract termites, it handles damp rooms, and it does not burn. Available from Shabbiri Hardware Kenya at our Ongata Rongai and Tuala branches, with delivery arranged across Kenya.

Technical Specifications

ProductFiber cement smooth board
ModelFCSB-8MM
Thickness8mm
Board size1200mm × 2400mm (4ft × 8ft)
Coverage per board2.88 m²
MaterialCement reinforced with fibres
SurfaceSmooth, flat, paintable face
ColourNatural cement grey (uncoloured)
Finish optionsPaint or texture coat
Suitable forInterior and exterior walls, partitions, ceilings, wet areas
Selling unitPer piece (one full board)

Key Benefits

  • Strong and rigid. Builds walls and partitions that feel firm and stand up to daily use.
  • Smooth surface. A flat, even face that takes paint well.
  • Moisture resistant. It does not rot, swell or go soft in bathrooms, kitchens or covered outdoor areas.
  • Termite proof. There is nothing in it for termites or borers to eat.
  • Does not burn. Cement board is non-combustible, a safer choice for walls and ceilings.
  • Large sheet size. One board covers 2.88 m², so walls go up quickly with fewer joints.
  • Easy to work with. Cut it to size on site and screw it to a timber or steel frame.
  • Long lasting. Once sealed and painted, it needs very little maintenance.

Best Places to Use It

  • Interior walls and wall lining
  • Office, shop and home partitions
  • Bathroom and kitchen walls
  • Ceilings where a stiff, flat board is wanted
  • Verandahs, eaves and other covered outdoor areas
  • Classrooms, hostels and clinics
  • Site offices, stores, kiosks and guard houses
  • Shop fittings and display backing
Good to know: For ceilings, a thinner board is lighter to lift. For floors and heavy-duty walls, choose a thicker board. Ask us and we will advise the right thickness for your job.

How to Install

  1. Build the frame. Fix a straight, level timber or steel frame with studs about 600mm apart (400mm for ceilings), and a support behind every board edge.
  2. Measure and mark. Mark your cut lines with a pencil and straight edge.
  3. Cut the board. Use a circular saw or grinder with a diamond or fibre cement blade, or score deeply and snap. Cut outdoors and wear a dust mask and eye protection.
  4. Pre-drill the holes. Drill screw holes about 15mm in from the edges and 50mm from the corners to prevent cracking.
  5. Screw the board on. Use countersunk fibre cement screws every 200–300mm along each support. Drive the heads just below the surface.
  6. Leave a small gap. Keep 2–3mm between boards to allow for movement.
  7. Fill the joints. Fill gaps and screw heads with joint tape and compound, or a flexible sealant, then sand smooth.
  8. Prime and paint. Apply an alkali-resistant primer, then two coats of paint. Outdoors, use exterior paint and seal all cut edges.
Handling tip: Carry the board on its edge with two people, and store boards flat, off the ground and under cover until they are fixed.
Please note: We supply the boards only. We do not install, but we can share contacts of independent installers on request.

How Many Boards Do You Need?

One board covers 2.88 m². Use this quick guide, which already includes about 10% extra for cutting:

Area to coverBoards to buy
10 m²4 boards
20 m²8 boards
50 m²20 boards
100 m²39 boards
Example: A wall 4m long × 3m high = 12 m². Divide by 2.88 = 4.2 boards. Add 10% = 4.6, so order 5 boards.

Not sure? Send us your measurements on WhatsApp and we will calculate the quantity for you.

Available Options

This page is for the 8mm smooth board. We also stock:

Primers, paint and sealants to finish the job are available at both branches.

Delivery and Collection

  • Collect from our branches. Pick up free of charge from Ongata Rongai or Tuala, both on Magadi Road.
  • Delivery on request. We arrange transport to your site in Nairobi and across Kenya. The delivery charge depends on your location and the number of boards.
  • Bring suitable transport. Boards are 2.4m long, so they must travel flat and fully supported on a pickup or lorry.
  • Easy payment. Pay by M-Pesa Paybill, bank or card.

Frequently Asked Questions

Can I use it in a bathroom?

Yes. It does not rot or swell from steam and damp. Seal the joints, then prime and paint with a washable paint.

Can I use it outside?

Yes. Seal the joints and cut edges, then prime and paint with exterior paint for the best life.

Can I paint it?

Yes. Apply an alkali-resistant primer first, then two coats of paint. We stock Crown Paints and can mix any colour you need.

Is it the same as gypsum board?

No. Gypsum board is lighter but is damaged by water and knocks. Fiber cement board is stronger and handles damp, so it suits wet rooms, outside areas and busy partitions.

Is 8mm strong enough for a partition wall?

Yes. Fixed to studs about 600mm apart, it makes a firm partition for homes, offices and shops.

Should I choose 6mm or 8mm?

Choose 6mm for ceilings and light wall lining. Choose 8mm for walls and partitions that need to be firmer.

How do I cut it?

Use a circular saw or grinder with a diamond or fibre cement blade, or score deeply and snap. Wear a dust mask.

What screws should I use?

Use countersunk self-drilling fibre cement screws for steel frames, or corrosion-resistant countersunk screws for timber frames. Pre-drill near the edges.

Do you install?

We supply the boards only. We can share contacts of independent installers on request.

Do you deliver outside Nairobi?

Yes. We arrange delivery countrywide. Send us your location and quantity on WhatsApp for a delivery quote.

Visit or Call Our Branches

Ongata Rongai Branch

Location: Magadi Road, Ongata Rongai, opposite Hashi Petrol Station

Call: 0792 961 751 or 0741 042 484

Open in Google Maps

Tuala Branch

Location: Magadi Road, Tuala, past Nazarene University

Call: 0741 393 113

Open in Google Maps

Online orders and enquiries: WhatsApp 0745 554 008  |  Email shabbirihardware@gmail.com  |  www.shabbirihardware.co.ke
KSH 3,650/ piece
KSH 4,000 · Save 9%
In stock
Delivery on request — same-day within Nairobi, next-day countrywide.
Free pickupat Rongai & Tuala branches.
Qty
1
📲 Order on WhatsApp
100% genuine, sourced materials
Secure M-Pesa & card payment
Countrywide delivery arranged
100% Genuine
No fakes, ever
Quality assured
Trusted brands only
Countrywide delivery
Arranged on request
Expert advice
Sales team on WhatsApp

Specifications

ModelFCSB-8MM
CategoryFiber Cement Boards
AvailabilityIn stock
Sourced byShabbiri Hardware Kenya Limited

Customer reviews

No reviews yet — be the first to review this product.

Frequently bought together

Customers who bought this often add these to their order.