Loading branch status…
Home / Fiber Cement Boards / Fiber Cement Smooth Board 15mm × 1200mm × 2400mm
NEWFiber Cement Smooth Board 15mm × 1200mm × 2400mm

Fiber Cement Smooth Board 15mm × 1200mm × 2400mm

KSH 8,443/ piece
In stock
About this product
Fiber Cement Boards

Fiber Cement Smooth Board 15mm × 1200mm × 2400mm

Our thickest and strongest smooth cement board, made for jobs where the board has to carry weight or take hard use: floor decking on joists, mezzanines, heavy-duty walls and partitions.

Each board is a full 8ft × 4ft sheet (1.2m × 2.4m) and covers 2.88 square metres. It is supplied plain grey (uncoloured), ready to tile, paint or cover with your chosen floor or wall finish.

Unlike plywood or chipboard, it does not rot, swell or get eaten by termites, so it stays solid in damp and outdoor areas. Available from Shabbiri Hardware Kenya at our Ongata Rongai and Tuala branches, with delivery arranged across Kenya.

Technical Specifications

ProductFiber cement smooth board
ModelFUSB-15MM
Thickness15mm
Board size1200mm × 2400mm (4ft × 8ft)
Coverage per board2.88 m²
MaterialCement reinforced with fibres
SurfaceSmooth, flat face
ColourNatural cement grey (uncoloured)
Finish optionsTiles, paint, vinyl or SPC flooring, texture coat
Suitable forFloor decking on joists, mezzanines, heavy-duty walls and partitions, wet areas
Approximate weightAbout 55–65 kg per board
Selling unitPer piece (one full board)

Key Benefits

  • Built for heavy use. At 15mm thick it is rigid and impact resistant, suitable for floors and walls that take daily knocks.
  • A dry, fast way to build a floor. Screw it to steel or timber joists and the floor is ready to finish, with no wet concrete and no curing time.
  • Handles water and damp. It does not rot, swell or go soft when it gets wet, unlike plywood and chipboard.
  • Termite and pest proof. There is nothing in it for termites or borers to eat.
  • Does not burn. Cement board is non-combustible, adding safety to floors and partitions.
  • Firm base for tiles. The stiff, stable surface helps prevent tiles from cracking or coming loose.
  • Long life with little maintenance. Once fixed and finished, it needs very little attention.

Best Places to Use It

  • Mezzanine floors in shops, stores, godowns and offices
  • Upper floors and decking on steel or timber joists in prefab and light-frame buildings
  • Raised floors, platforms and stages
  • Heavy-duty external walls and cladding
  • Strong partition walls in schools, hospitals, factories and public buildings
  • Bathroom, kitchen and laundry floors and walls, as a backing for tiles
  • Container conversions, site offices and guard houses
Good to know: For floors carrying heavy loads such as machinery, bulk storage or many people, have an engineer confirm the joist size and spacing. For ordinary walls and ceilings, a thinner board is lighter and more economical.

How to Install

  1. Prepare the frame. For floors, fix the board on level steel or timber joists spaced no more than 400mm apart, with every board edge resting on a support. For walls, studs can be up to 600mm apart.
  2. Measure and mark. Mark your cut lines with a pencil and straight edge.
  3. Cut the board. Use a circular saw or grinder fitted with a diamond or fibre cement blade. Cut outdoors and wear a dust mask and eye protection.
  4. Stagger the joints. On floors, lay the boards across the joists in a brick pattern so the short joints do not line up.
  5. Pre-drill the holes. Drill screw holes at least 12mm in from the edges and 50mm from the corners to prevent cracking.
  6. Screw the board down. Use countersunk fibre cement screws about 200–300mm apart along every support. Drive the heads just below the surface.
  7. Leave a small gap. Keep a 3mm gap between boards and at the walls to allow for movement.
  8. Fill the joints. Fill gaps and screw heads with a flexible sealant or jointing compound.
  9. Apply the finish. Tile with a flexible adhesive, lay your floor covering, or prime with an alkali-resistant primer and paint. On outside walls, seal all cut edges too.
Handling tip: This is a heavy board. Always carry it on its edge with two people, and store boards flat, off the ground and under cover until they are fixed.
Please note: We supply the boards only. We do not install, but we can share contacts of independent installers on request.

How Many Boards Do You Need?

One board covers 2.88 m². To work out your quantity:

  • Measure the length and width of the floor (or the length and height of each wall) in metres and multiply them to get the area.
  • Add all the areas together.
  • Divide the total by 2.88.
  • Add about 10% extra for cutting and wastage, then round up to the next full board.
Example: A mezzanine floor 6m long × 4m wide = 24 m². Divide by 2.88 = 8.3 boards. Add 10% for wastage = 9.2, so order 10 boards.

Not sure? Send us your measurements on WhatsApp and we will calculate the quantity for you.

Available Options

This page is for the 15mm smooth board. We also stock:

  • Thinner smooth boards in the same 1200mm × 2400mm size, for ceilings, standard walls and partitions
  • V-grooved fiber cement boards for a decorative panelled look
  • Eaves vent boards (600mm × 1200mm) with vent slots for roof airflow

Floor finishes such as SPC and laminate flooring, plus sealants, primers and paint, are available at both branches.

Delivery and Collection

  • Collect from our branches. Pick up free of charge from Ongata Rongai or Tuala, both on Magadi Road.
  • Delivery on request. We arrange transport to your site in Nairobi and across Kenya. The delivery charge depends on your location and the number of boards.
  • Bring suitable transport. Boards are 2.4m long and heavy, so they must travel flat on a pickup or lorry.
  • Easy payment. Pay by M-Pesa Paybill, bank or card.

Frequently Asked Questions

Can I use this board for a floor?

Yes. The 15mm board is used as floor decking on steel or timber joists spaced no more than 400mm apart, with all board edges supported. For heavy loads, ask an engineer to confirm the frame.

Can I tile directly on it?

Yes. It is a firm, stable base for floor and wall tiles. Use a flexible tile adhesive and leave movement gaps at the walls.

Can I lay SPC, laminate or vinyl flooring over it?

Yes. Make sure the boards are level and the joints are filled smooth first. We stock SPC and laminate flooring at both branches.

Is it waterproof?

It is water resistant. It will not rot, swell or fall apart when wet. For areas with constant water, such as shower floors, seal the joints and apply a waterproofing coat before tiling.

Can I use it outside?

Yes. Seal the joints and cut edges, then prime and paint with exterior paint for the best life.

How is it different from plywood or chipboard flooring?

Plywood and chipboard are lighter but can swell, rot and attract termites when damp. Fiber cement board is heavier, does not burn and is not affected by water or pests.

How do I cut it?

Use a circular saw or grinder with a diamond or fibre cement blade. Cut outdoors and wear a dust mask.

What screws should I use?

Use countersunk self-drilling fibre cement screws for steel frames, or corrosion-resistant countersunk screws for timber frames. Pre-drill near the edges.

Should I choose 12mm or 15mm?

Choose 15mm for floors, mezzanines and walls that take heavy use. For normal walls and partitions, 12mm or thinner is usually enough.

Do you deliver outside Nairobi?

Yes. We arrange delivery countrywide. Send us your location and quantity on WhatsApp for a delivery quote.

Visit or Call Our Branches

Ongata Rongai Branch

Location: Magadi Road, Ongata Rongai, opposite Hashi Petrol Station

Call: 0792 961 751 or 0741 042 484

Open in Google Maps

Tuala Branch

Location: Magadi Road, Tuala, past Nazarene University

Call: 0741 393 113

Open in Google Maps

Online orders and enquiries: WhatsApp 0745 554 008  |  Email shabbirihardware@gmail.com  |  www.shabbirihardware.co.ke
KSH 8,443/ piece
In stock
Delivery on request — same-day within Nairobi, next-day countrywide.
Free pickupat Rongai & Tuala branches.
Qty
1
📲 Order on WhatsApp
100% genuine, sourced materials
Secure M-Pesa & card payment
Countrywide delivery arranged
100% Genuine
No fakes, ever
Quality assured
Trusted brands only
Countrywide delivery
Arranged on request
Expert advice
Sales team on WhatsApp

Specifications

ModelFUSB-15MM
CategoryFiber Cement Boards
AvailabilityIn stock
Sourced byShabbiri Hardware Kenya Limited

Customer reviews

No reviews yet — be the first to review this product.

Frequently bought together

Customers who bought this often add these to their order.