
Fiber Cement Smooth Board 4mm × 1200mm × 2400mm |Paintable Cement Board Kenya
A Light, Paintable Board for Ceilings
The 4mm fiber cement smooth board is a slim, light cement board made mainly for ceilings and internal linings. It is easy to lift overhead, easy to cut, and gives a flat, smooth surface that is ready to paint.
Each board is a full 8ft × 4ft sheet (1.2m × 2.4m) and covers 2.88 square metres. It is supplied plain grey (uncoloured).
Unlike soft board, chipboard or timber ceilings, it does not rot, sag from damp or get eaten by termites, so your ceiling stays flat and clean for years. Available from Shabbiri Hardware Kenya at our Ongata Rongai and Tuala branches, with delivery arranged across Kenya.
Technical Specifications
| Product | Fiber cement smooth board |
|---|---|
| Model | FCSB-4MM |
| Thickness | 4mm |
| Board size | 1200mm × 2400mm (4ft × 8ft) |
| Coverage per board | 2.88 m² |
| Material | Cement reinforced with fibres |
| Surface | Smooth, flat face |
| Colour | Natural cement grey (uncoloured) |
| Finish options | Paint or texture coat |
| Suitable for | Ceilings, eaves and soffits, internal wall linings, light partitions |
| Selling unit | Per piece (one full board) |
Key Benefits
- Light and easy to fix. The slim 4mm board is easy to carry, lift overhead and fasten to a ceiling frame.
- Easy to cut. It can be scored with a knife and snapped, with no power tools needed for straight cuts.
- Handles moisture. It does not rot, swell or sag in humid rooms such as kitchens, bathrooms and verandahs.
- Termite and pest proof. There is nothing in it for termites or borers to eat.
- Does not burn. Cement board is non-combustible, a safer choice above living spaces.
- Smooth, paintable face. Takes paint well for a clean, modern ceiling.
- Good value. One board covers 2.88 m², making it an economical way to close a large ceiling.
Best Places to Use It
- Ceilings in homes, rentals, shops, offices, schools and churches
- Kitchen, bathroom and verandah ceilings where damp damages other boards
- Roof eaves and soffits
- Internal wall linings and panelling on a frame
- Light partitions that will not take knocks
- Replacing old, stained or sagging soft-board ceilings
How to Install
- Prepare the frame. Fix a straight, level timber or steel ceiling frame. Supports should be no more than 400mm apart, with a support behind every board edge.
- Measure and mark. Mark your cut lines with a pencil and straight edge. Many fundis cut the sheet into smaller panels, such as 1200mm × 600mm, for easier ceiling work.
- Cut the board. Score the line deeply several times with a scoring knife, then snap the board over a straight edge. For curves or holes, use a grinder or jigsaw and wear a dust mask.
- Pre-drill the holes. Drill fixing holes at least 12mm in from the edges and 50mm from the corners to prevent cracking.
- Fix the board. Use fibre cement nails or corrosion-resistant screws about 200mm apart. Tighten gently, as over-driving can crack a thin board.
- Leave a small gap. Keep 2–3mm between boards. Cover the joints with PVC, aluminium or timber jointing strips, or fill them with a flexible sealant.
- Prime and paint. Apply an alkali-resistant primer, then two coats of good quality paint.
How Many Boards Do You Need?
One board covers 2.88 m². To work out your quantity:
- Measure the length and width of each room in metres and multiply them to get the ceiling area.
- Add all the room areas together.
- Divide the total by 2.88.
- Add about 10% extra for cutting and breakage, then round up to the next full board.
Not sure? Send us your room sizes on WhatsApp and we will calculate the quantity for you.
Delivery and Collection
- Collect from our branches. Pick up free of charge from Ongata Rongai or Tuala, both on Magadi Road.
- Delivery on request. We arrange transport to your site in Nairobi and across Kenya. The delivery charge depends on your location and the number of boards.
- Transport with care. Boards are 2.4m long and thin, so they must travel flat and fully supported on a pickup or lorry.
- Easy payment. Pay by M-Pesa Paybill, bank or card.
Frequently Asked Questions
Is the 4mm board good for ceilings?
Yes. It is a common choice for ceilings because it is light, easy to fix overhead and does not sag from damp.
Can I use it in a bathroom or kitchen?
Yes. It handles steam and humidity well. Prime and paint it with a washable paint for the best result.
Can I use it for walls?
Only as a lining or light partition on a frame, in places where it will not be knocked. For strong walls, outside walls or walls to be tiled, choose a thicker board.
Can I use it outside?
Yes, for sheltered areas such as eaves, soffits and verandah ceilings. Prime and paint it with exterior paint.
How do I cut it?
Score the line deeply with a scoring knife and snap the board over a straight edge. Use a grinder or jigsaw for shaped cuts, and wear a dust mask.
Can I paint it?
Yes. Apply an alkali-resistant primer first, then two coats of paint. We stock Crown Paints and can mix any colour you need.
How do I hide the joints?
Use PVC, aluminium or timber jointing strips for a panelled look, or fill the gaps with a flexible sealant before painting.
How is it different from gypsum board?
Gypsum gives a seamless plastered finish but is damaged by water. Fiber cement board is not affected by damp or leaks, so it suits wet rooms, verandahs and areas under mabati roofs.
Can I hang lights or fans from it?
Fix lights, fans and other fittings to the ceiling frame behind the board, not to the board alone.
Do you deliver outside Nairobi?
Yes. We arrange delivery countrywide. Send us your location and quantity on WhatsApp for a delivery quote.
Visit or Call Our Branches
Ongata Rongai Branch
Location: Magadi Road, Ongata Rongai, opposite Hashi Petrol Station
Call: 0792 961 751 or 0741 042 484
Specifications
| Model | FCSB-4MM |
| Category | Fiber Cement Boards |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



