Loading branch status…
Home / Fiber Cement Boards / Fiber Cement Smooth Board 6mm × 1200mm × 2400mm | Durable Paintable Cement Board Kenya
Fiber Cement Smooth Board 6mm × 1200mm × 2400mm | Durable Paintable Cement Board Kenya

Fiber Cement Smooth Board 6mm × 1200mm × 2400mm | Durable Paintable Cement Board Kenya

KSH 2,650
KSH 3,000Save 12%
In stock
About this product
Fiber Cement Boards

An All-Round Board for Ceilings and Walls

The 6mm fiber cement smooth board is strong enough for wall lining and partitions, yet still light enough to fix on a ceiling. That makes it the practical choice when you want one board for most jobs in the house.

Each board is a full 8ft × 4ft sheet (1.2m × 2.4m) and covers 2.88 square metres. It is supplied plain grey (uncoloured), with a smooth face that is ready to paint.

It does not rot, swell or get eaten by termites, and it does not burn, so it lasts indoors and outdoors where timber and soft boards fail. Available from Shabbiri Hardware Kenya at our Ongata Rongai and Tuala branches, with delivery arranged across Kenya.

Technical Specifications

ProductFiber cement smooth board
ModelFCSB-6MM
Thickness6mm
Board size1200mm × 2400mm (4ft × 8ft)
Coverage per board2.88 m²
MaterialCement reinforced with fibres
SurfaceSmooth, flat, paintable face
ColourNatural cement grey (uncoloured)
Finish optionsPaint or texture coat
Suitable forInterior and exterior use, including wet areas
Selling unitPer piece (one full board)

Key Benefits

  • One board for many jobs. Works for ceilings, wall lining, partitions, eaves and cladding.
  • Handles water and damp. It does not rot, swell or go soft in bathrooms, kitchens or outdoors.
  • Termite and rot proof. There is nothing in it for termites or borers to eat.
  • Does not burn. Cement board is non-combustible, a safer choice for walls and ceilings.
  • Smooth, paintable face. Takes paint well for a clean, finished look in any colour.
  • Easy to cut and fix. Can be scored and snapped, then screwed to a timber or steel frame.
  • Stronger than thin ceiling board. Stands up better to handling and light knocks than a 4mm board.

Best Places to Use It

  • Ceilings in homes, shops, offices, schools and churches
  • Internal wall lining and cladding on a frame
  • Partition walls in homes and offices
  • Roof eaves and soffits
  • Outside wall cladding and facades on a frame
  • Bathroom, kitchen and laundry walls and ceilings
Good to know: For walls that will be tiled or take hard knocks, and for floors, choose a thicker board. Ask us and we will advise the right thickness for your job.

How to Install

  1. Prepare the frame. Fix a straight, level timber or steel frame. Supports should be no more than 400mm apart for ceilings and 600mm for walls, with a support behind every board edge.
  2. Measure and mark. Mark your cut lines with a pencil and straight edge.
  3. Cut the board. Score the line deeply several times with a scoring knife and snap the board over a straight edge, or use a grinder with a diamond blade. Wear a dust mask and eye protection.
  4. Pre-drill the holes. Drill fixing holes at least 12mm in from the edges and 50mm from the corners to prevent cracking.
  5. Screw the board on. Use countersunk fibre cement screws about 200–300mm apart along every support. Do not over-tighten.
  6. Leave a small gap. Keep 2–3mm between boards to allow for movement.
  7. Finish the joints. Fill the gaps and screw heads with a flexible sealant or jointing compound, or cover the joints with jointing strips.
  8. Prime and paint. Apply an alkali-resistant primer, then two coats of paint. Use exterior paint outdoors and seal all cut edges.
Handling tip: Carry the board on its edge and do not let it bend. Store boards flat, off the ground and under cover until they are fixed.
Please note: We supply the boards only. We do not install, but we can share contacts of independent installers on request.

How Many Boards Do You Need?

One board covers 2.88 m². Use this quick guide, which already includes about 10% extra for cutting:

Area to coverBoards to buy
10 m²4 boards
20 m²8 boards
50 m²20 boards
100 m²39 boards
For any other size: multiply length × width (or height) in metres to get the area, divide by 2.88, add 10%, then round up to the next full board.

Not sure? Send us your room or wall sizes on WhatsApp and we will work it out for you.

Available Options

This page is for the 6mm smooth board. We also stock:

Primers, paint and sealants to finish the job are available at both branches.

Delivery and Collection

  • Collect from our branches. Pick up free of charge from Ongata Rongai or Tuala, both on Magadi Road.
  • Delivery on request. We arrange transport to your site in Nairobi and across Kenya. The delivery charge depends on your location and the number of boards.
  • Transport with care. Boards are 2.4m long, so they must travel flat and fully supported on a pickup or lorry.
  • Easy payment. Pay by M-Pesa Paybill, bank or card.

Frequently Asked Questions

Can I use this board outside?

Yes. It stands up to sun and rain. Seal the joints and cut edges, then prime and paint with exterior paint.

Can I use it in a bathroom or kitchen?

Yes. It does not rot or swell from steam and damp. Prime and paint it with a washable paint.

Is 6mm good for ceilings?

Yes. It is heavier than a 4mm board but stiffer, so it suits ceilings where you want a firmer, flatter finish.

Should I choose 4mm or 6mm?

Choose 4mm when you want the lightest board for a ceiling. Choose 6mm when the board will also be used on walls, partitions or outside.

Can I paint it?

Yes. Apply an alkali-resistant primer first, then two coats of paint. We stock Crown Paints and can mix any colour you need.

Can I tile over it?

For tiled walls we recommend a thicker board, which gives the tiles a firmer base.

How do I cut it?

Score the line deeply with a scoring knife and snap the board over a straight edge, or use a grinder with a diamond blade. Wear a dust mask.

How is it different from gypsum board?

Gypsum gives a seamless plastered finish but is damaged by water. Fiber cement board is not affected by damp or leaks, so it suits wet rooms and outdoor areas.

Do you install?

We supply the boards only. We can share contacts of independent installers on request.

Do you deliver outside Nairobi?

Yes. We arrange delivery countrywide. Send us your location and quantity on WhatsApp for a delivery quote.

Visit or Call Our Branches

Ongata Rongai Branch

Location: Magadi Road, Ongata Rongai, opposite Hashi Petrol Station

Call: 0792 961 751 or 0741 042 484

Open in Google Maps

Tuala Branch

Location: Magadi Road, Tuala, past Nazarene University

Call: 0741 393 113

Open in Google Maps

Online orders and enquiries: WhatsApp 0745 554 008  |  Email shabbirihardware@gmail.com  |  www.shabbirihardware.co.ke
KSH 2,650
KSH 3,000 · Save 12%
In stock
Delivery on request — same-day within Nairobi, next-day countrywide.
Free pickupat Rongai & Tuala branches.
Qty
1
📲 Order on WhatsApp
100% genuine, sourced materials
Secure M-Pesa & card payment
Countrywide delivery arranged
100% Genuine
No fakes, ever
Quality assured
Trusted brands only
Countrywide delivery
Arranged on request
Expert advice
Sales team on WhatsApp

Specifications

ModelFCSB-6MM
CategoryFiber Cement Boards
AvailabilityIn stock
Sourced byShabbiri Hardware Kenya Limited

Customer reviews

No reviews yet — be the first to review this product.

Frequently bought together

Customers who bought this often add these to their order.