A 1-part, cementitious, polymer-modified bonding primer with active corrosion inhibitors — protects steel reinforcement (rebar) from rust and bonds repair mortars firmly to concrete. Available at Shabbiri Hardware, Magadi Road, Ongata Rongai & Tuala (past Nazarene University).
📲 WhatsApp for Price — 0741 042484 📞 Call 0745 554008Coats exposed and cleaned steel reinforcement bars to stop rust in concrete repair works — columns, beams, slabs, balconies and cantilevers.
Applied on prepared concrete surfaces before Sika MonoTop repair mortars for maximum adhesion in patch repair systems.
Controls anodic areas per Principle 11, Method 11.1 of EN 1504-9 — a professional-grade corrosion management solution.
Suitable for homes, commercial buildings, bridges, water tanks and marine-exposed structures across Kenya.
| Property | Detail |
|---|---|
| Product Name | SikaMonoTop®-1010 KE |
| Type | 1-component cementitious, polymer-modified bonding slurry with corrosion inhibitors |
| Appearance | Grey powder |
| Packaging | 25 kg bag |
| Shelf Life | 12 months in original unopened packaging, stored dry |
| Application Thickness | Minimum 2 mm for rebar corrosion protection (2 coats) |
| Application Method | Stiff brush or wet-spray technique |
| Standards | EN 1504-7 (reinforcement corrosion protection) • KEBS certified |
| Country of Origin | Made in Kenya 🇰🇪 |
| Storage | Cool, dry conditions in unopened original packaging |
Remove all loose, weak or contaminated concrete. Clean exposed rebar to bright metal using a wire brush, grit blasting or needle gun — remove all rust, scale, oil and grease.
Thoroughly pre-wet the prepared concrete substrate, ideally 2 hours before application, keeping the surface wet. Remove excess standing water with a clean sponge — the surface should appear dark matt without glistening, with no water sitting in pores.
Pour the recommended clean water (see dosage printed on the bag) into a mixing container. Slowly add the powder while stirring and mix for at least 3 minutes with a low-speed (<500 rpm) paddle mixer until a smooth, lump-free slurry forms. Never exceed the recommended water dosage.
Brush the slurry onto the cleaned steel in 2 coats, achieving a minimum total thickness of 2 mm. Allow the coating to harden, then apply the repair mortar wet-on-dry over it.
Scrub the slurry firmly into the pre-wetted concrete, filling all pores and voids. Apply the Sika repair mortar wet-on-wet while the primer is still fresh.
Clean all tools and equipment with water immediately after use. Hardened material can only be removed mechanically.
Buy genuine Sika MonoTop-1010 KE 25kg at the best price in Nairobi from Shabbiri Hardware Kenya Limited — your trusted building materials supplier since 1990.
🚚 Countrywide delivery available. Ask about our full range of Sika waterproofing & concrete repair products.
| Brand | sika |
| Model | sika |
| Category | Cement |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
No reviews yet — be the first to review this product.
Customers who bought this often add these to their order.