
HM-036 Heavy Gauge PVC Ceiling Panel – Light Oak Grooved Wood Grain
Heavy Gauge PVC Ceiling Panel – Light Oak Grooved Wood Grain
A thick, rigid PVC ceiling board with a soft whitewashed light-oak grain and decorative V-grooves. You get the warm look of a timber ceiling without termites, rot, painting or water damage.
iProduct Overview
The HM-036 heavy gauge PVC ceiling panel is a premium tongue-and-groove ceiling board made from rigid PVC. It has a realistic light oak / whitewashed ash wood-grain face with V-grooves along its length, so the finished ceiling looks like narrow timber slats with clean shadow lines.
"Heavy gauge" means thicker outer walls and stronger internal ribs than ordinary PVC ceiling. The panel stays straight between brandering, resists dents during fixing and keeps its shape in warm weather. Homeowners, contractors and fundis in Ongata Rongai, Tuala, Kiserian, Karen, Kitengela, Kajiado and Nairobi choose it for a durable wood-look ceiling at a lower long-term cost than timber or gypsum.
The pale neutral colour reflects light, so small rooms, corridors and bathrooms look brighter and bigger. It matches white walls, grey tiles, SPC flooring and modern interiors.
★Key Features & Benefits
≡Technical Specifications
- Model / Code
- HM-036
- Category
- PVC Ceiling Panels / Boards
- Material
- Rigid PVC with stabilisers & mineral filler
- Grade
- Heavy gauge (thick-wall, anti-sag)
- Profile
- Hollow-core, multi-chamber, tongue & groove
- Surface
- Multi-groove face with lengthwise V-grooves
- Colour / Finish
- Light oak / whitewashed ash wood grain, matte-satin
- Typical Width
- 250 mm (effective cover)
- Typical Length
- 5.95 m (cut to size on site)
- Typical Thickness
- 8 – 9 mm
- Coverage / Panel
- ≈ 1.49 m²
- Water Absorption
- Negligible – fully waterproof
- Fire Behaviour
- Self-extinguishing
- Termite / Rot
- Resistant – not attacked
- Fixing
- Nail, staple, screw or clip through the tongue
- Support Spacing
- Brandering at 400 – 600 mm centres
- Accessories
- PVC cornice, L-angle, H-joint, end cap, corner trim
- Use
- Interior ceilings & covered soffits
Sizes shown are standard for heavy gauge PVC ceiling in Kenya and may vary slightly by batch. Please confirm exact size and stock with our sales team.
⌂Where to Use It
⚒How to Install HM-036 PVC Ceiling
- HM-036 panels + about 10% extra for cutting
- Treated 2"×2" timber brandering or metal furring channels
- PVC cornice / L-angle and H-joints
- Galvanised nails, staples, screws or ceiling clips
- Tape measure, level, chalk line, fine-tooth saw, utility knife
- Hammer or staple gun, drill, ladder or scaffold
Not sure? WhatsApp your room sizes to 0741 042484 and we'll calculate panels, cornice and brandering for you.
✓Installation Do's & Don'ts
- Store panels flat and in shade
- Leave a 3 – 5 mm gap at each end
- Use treated timber in termite areas
- Support lights and fans on the framing
- Leave panels in direct sun before fitting
- Hang heavy loads from the panels
- Let hot bulbs touch the PVC
- Clean with thinners or abrasives
♥Care & Maintenance
- Dust with a soft broom or dry microfibre cloth.
- For grease or stains, wipe with warm water and mild soap.
- Good bathroom ventilation keeps the ceiling cleaner for longer.
- A damaged panel can be replaced alone, with no need to redo the whole ceiling.
?Frequently Asked Questions
What does "heavy gauge" mean?
The panel has thicker skins and internal ribs than standard PVC ceiling. It feels rigid, doesn't sag between brandering and resists dents.
Can I use it in bathrooms and kitchens?
Yes. PVC doesn't absorb water, so HM-036 won't swell, rot or grow mould like gypsum or chipboard.
Is HM-036 termite proof?
Yes. Termites don't eat PVC. Treat any timber brandering used to fix it.
How many pieces do I need?
Room length × width ÷ 1.49, plus 10% for waste. Or WhatsApp your room sizes to 0741 042484 and we'll calculate it for you.
Can it be used on walls?
Yes. It works as interior wall cladding or a feature wall, fixed onto battens the same way as a ceiling.
Do you install?
We are supply-only, but we can share contacts of independent PVC ceiling fundis around Rongai, Tuala and Kiserian.
Where can I buy HM-036 in Nairobi?
At Shabbiri Hardware on Magadi Road: Ongata Rongai branch (opposite Hashi Petrol Station) and Tuala branch (past Nazarene University). Call 0741 042484 or 0745 554008.
⌖Visit Our Branches
Magadi Road, opposite Hashi Petrol Station, Ongata Rongai
Tel: 0741 042484
Magadi Road, past Nazarene University, Tuala
Tel: 0745 554008
Call, WhatsApp or email us for availability and a quotation.
Specifications
| Model | HM-036 |
| Category | PVC Ceiling Panels |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



