PVC Ceiling Heavy Gauge HM-023 Whitewash Oak Grooved Panel | Nairobi Kenya

Heavy GaugeWaterproofWood-Grain Grooved

PVC Ceiling Heavy Gauge HM-023 – Whitewash Oak Wood-Grain Grooved Ceiling Panel in Nairobi, Kenya

Name: PVC Ceiling Heavy Gauge HM-023 – Whitewash Oak Wood-Grain Grooved Ceiling Panel
Brand: Shabbiri Hardware
SKU: HM-023
Price: 4500 KES
Availability: InStock

Give your ceiling the warm, modern look of natural limed oak without the cost, weight or maintenance of timber. HM-023 is a premium heavy gauge PVC ceiling panel with a soft whitewash-grey wood-grain finish and elegant linear grooves – 100% waterproof, termite-proof and ready to install. In stock at Shabbiri Hardware, Magadi Road – Ongata Rongai & Tuala.

Product Overview

The PVC Ceiling Heavy Gauge HM-023 is a tongue-and-groove, hollow-core PVC ceiling board designed for Kenyan homes and commercial buildings. Its whitewash oak / light ash-grey wood-grain print is protected by a durable surface layer, while raised decorative grooves create a clean, linear "plank" effect that makes rooms look wider and brighter.

Being heavy gauge, HM-023 has thicker outer walls and stronger internal ribs than ordinary light-gauge PVC ceilings. The result: panels that stay straight between brandering, resist denting and sagging, and deliver a long-lasting, premium finish – ideal for living rooms, bedrooms, bathrooms, kitchens, verandas, offices, shops, hotels, schools, churches and rental units.

Key Features & Benefits

Heavy Gauge Strength

Thicker skins and dense internal ribs – no sagging, less breakage during handling and fixing.

100% Waterproof

Will not swell, rot or warp – perfect for bathrooms, kitchens and humid areas.

Natural Wood Look

Realistic whitewash oak grain with decorative grooves – the beauty of timber, none of the upkeep.

Termite & Pest Proof

PVC gives nothing for termites, borers or rodents to eat.

No Painting Needed

Factory-finished surface – wipe clean with a damp cloth, no repainting ever.

Fast, Clean Install

Lightweight tongue-and-groove panels click together quickly with basic tools.

Heat & Sound Comfort

Hollow-core design adds a layer of insulation under iron sheet roofs, reducing heat and rain noise.

Fire Retardant

Self-extinguishing PVC formulation – does not support flame once the source is removed.

Technical Specifications

Specification	Details
Product Name	PVC Ceiling Heavy Gauge – HM-023
Design Code	HM-023
Colour / Finish	Whitewash Oak (light ash-grey) wood-grain print
Surface Profile	Decorative linear grooves (multi-plank / fluted effect)
Material	Rigid PVC (Polyvinyl Chloride) with calcium carbonate filler & UV/heat stabilisers
Gauge / Grade	Heavy gauge (reinforced, thicker walls)
Standard Width	250 mm (effective cover)
Standard Length	5.95 m (cut to size on site)
Thickness	Approx. 8 – 9 mm
Coverage per Panel	Approx. 1.49 m² (0.25 m × 5.95 m)
Core Structure	Hollow-core with internal support ribs
Joint Type	Tongue-and-groove, concealed fixing
Water Absorption	Nil – fully waterproof
Fire Behaviour	Flame retardant / self-extinguishing
Termite / Mould Resistance	Fully resistant
Recommended Support Spacing	Brandering / furring channel at 400 – 600 mm centres
Maintenance	Wipe with damp cloth & mild soap; no painting required
Application	Interior ceilings & wall cladding, covered verandas/eaves (not direct exposed outdoor)
Matching Accessories	PVC L-angle / edge trim, PVC cornice, joint trims, 1" × 2" brandering or galvanised furring channel

Note: Dimensions may vary slightly by batch. Please confirm exact length and width with our sales team before ordering.

How to Install PVC Ceiling HM-023 – Step by Step

Tools & Materials Needed

HM-023 PVC panelsPVC L-angle / edge trimPVC cornice (optional)1" × 2" treated brandering or furring channelNails / staples / screwsTape measureSpirit level or laser levelChalk lineFine-tooth hacksaw / cutterHammer / staple gun / drillSilicone or PVC adhesiveSafety goggles & ladder

Installation Steps

Measure the room. Measure length and width of the ceiling, calculate the area (m²) and note positions of lights, fans and access hatches.

Mark the level line. Using a spirit or laser level, mark the finished ceiling height all around the walls with a chalk line.

Fix the brandering. Fix 1" × 2" treated timber brandering (or galvanised furring channel) to the trusses/joists at 400 – 600 mm centres, running at right angles to the direction the panels will run. Keep the frame perfectly level.

Install the wall trims. Fix PVC L-angle or edge trim around the perimeter along the level line. This hides cut edges and holds panel ends neatly.

Cut the panels. Cut each panel about 5 mm shorter than the room width to allow for expansion. Use a fine-tooth saw or sharp cutter for clean edges.

Fit the first panel. Slide the first panel into the wall trim with the groove side facing the wall. Fix through the tongue into every brandering using nails, staples or screws – fixings are hidden by the next panel.

Continue panel by panel. Push each new panel's groove firmly onto the previous tongue so joints close tightly, then fix through the tongue. Check alignment regularly.

Cut out for fittings. Mark and cut openings for lights, fans and hatches before fixing the affected panel.

Fit the last panel. Cut the last panel to width, slide it into the opposite trim and secure. A small bead of adhesive or silicone can be used where fixing is not possible.

Finish & clean. Install cornice if desired, remove the protective film (if any) and wipe the ceiling with a damp cloth.

Pro Tips: Store panels flat and out of direct sun before installation. Run panels parallel to the main light source (window) for the best look. Allow a small expansion gap at all ends – PVC expands slightly in hot weather. Do not place halogen or hot lamps in direct contact with the panels; use LED fittings.

How Many Panels Do I Need?

Formula: Ceiling area (m²) ÷ 1.49 m² per panel + 5–10% waste.

Example: Room 4 m × 3.5 m = 14 m² → 14 ÷ 1.49 ≈ 9.4 → add 10% waste ≈ 11 panels.

Not sure? Send us your room sizes on WhatsApp 0741 042484 and we'll calculate panels, trims and brandering for free.

Where to Use HM-023 PVC Ceiling

Living roomsBedroomsBathrooms & toiletsKitchensVerandas & covered patiosOfficesShops & showroomsHotels & restaurantsSchools & hospitalsChurches & mosquesRental apartmentsFeature walls

Why Choose PVC Ceiling Over Gypsum or Timber?

Unlike gypsum, PVC ceiling will not be damaged by roof leaks or humidity and needs no painting. Unlike timber, it will not be attacked by termites, will not warp, and costs far less to maintain. Heavy gauge HM-023 gives you the premium wood look with the practical advantages of PVC – a smart choice for Nairobi, Ongata Rongai, Kitengela, Karen, Ngong, Kiserian and across Kenya.

Frequently Asked Questions

What is a heavy gauge PVC ceiling?

Heavy gauge PVC ceiling has thicker outer skins and stronger internal ribs than standard/light gauge panels. It stays straight between supports, resists sagging and denting, and lasts longer.

Can PVC ceiling HM-023 be used in bathrooms and kitchens?

Yes. PVC is 100% waterproof and does not rot, swell or grow mould, making HM-023 ideal for bathrooms, kitchens, laundry areas and verandas.

How many PVC ceiling panels do I need per room?

Divide the ceiling area (m²) by the coverage of one panel (approx. 1.49 m²), then add 5–10% for cutting waste. Our staff at Ongata Rongai and Tuala will calculate it for you free.

Can HM-023 be used on walls?

Yes. The panels can be fixed vertically or horizontally on brandering as a waterproof wall cladding or feature wall.

How do I clean a PVC ceiling?

Wipe with a soft damp cloth and mild soapy water. Avoid abrasive scourers and strong solvents.

Do you install PVC ceilings?

Shabbiri Hardware is supply-only, but we can share contacts of experienced independent ceiling installers in your area.

Where can I buy PVC ceiling HM-023 in Nairobi?

At Shabbiri Hardware, Magadi Road – Ongata Rongai (opposite Hashi Petrol Station) and Tuala (past Nazarene University). Call 0741 042484 or 0745 554008.