
PVC Ceiling Heavy Gauge HM-028 – White Grooved PVC Ceiling Panels
White Grooved PVC Ceiling Panels – Waterproof, No Painting
A thick, rigid PVC ceiling board with a modern multi-groove face. Built for homes, rentals, offices, shops, kitchens and bathrooms across Nairobi and Kajiado.
1Product Overview
The PVC Ceiling Heavy Gauge HM-028 is a hollow-core rigid PVC ceiling board made with thicker walls and stronger internal ribs than ordinary light-gauge panels. Its white face has evenly spaced decorative grooves for a neat strip-ceiling look, and the tongue-and-groove edges lock each panel tightly to the next.
PVC doesn't absorb moisture, so HM-028 won't swell, rot, peel or grow mould. That makes it a better choice than gypsum, soft board or timber in wet rooms and during Kenya's rainy seasons. It is light, quick to fix and cleans with a simple wipe.
2Technical Specifications
- ProductPVC Ceiling Heavy Gauge
- CodeHM-028
- TypeHollow-core interlocking ceiling panel
- MaterialRigid PVC with UV & impact stabilisers
- GaugeHeavy – thick skin, reinforced ribs
- ColourWhite
- SurfaceMulti-groove (striped) face
- FinishMatte-satin, no painting needed
- WidthApprox. 250 mm
- LengthApprox. 5.95 m (cut on site)
- ThicknessApprox. 8 – 9 mm
- CoverageApprox. 1.49 m² per panel
- EdgeTongue-and-groove
- Water100% waterproof
- PestsTermite, rot & mould resistant
- FireSelf-extinguishing PVC
- InsulationAir-cell core adds light heat & sound insulation
- Fixing baseTimber battens or metal furring channels
- FixingsNails, staples or screws (hidden in joint)
3Features & Benefits
Stronger body
Less sagging between battens and fewer dents during handling.
Wet-area ready
Bathrooms, kitchens, laundries and verandas – no stains or mould.
No painting
Bright white factory finish saves paint and labour costs.
Termite proof
Nothing for termites or fungus to attack, unlike timber.
Quick install
Light interlocking panels go up fast with basic tools.
Modern look
The grooved face adds depth and a clean linear style.
4How to Install
- Measure. Room area (m²) ÷ 1.49 = panels needed. Add 5–10% for cutting.
- Plan direction. Run panels along the longest wall or away from the window so joints show less.
- Fix brandering. Timber battens or metal channels at 400–600 mm centres, levelled with a string line.
- Fit wall trims. Fix PVC L or U trims around the room at ceiling level.
- Cut panels. Wall-to-wall length minus about 5 mm each end. Use a fine-tooth saw or sharp knife.
- First panel. Slide into the trim, groove side to the wall, and fix through the tongue into every batten.
- Interlock. Push each new panel onto the previous tongue until tight, then fix. Fixings stay hidden.
- Openings. Cut holes for lights and fans before fixing that panel.
- Last panel. Trim to width, flex slightly and slide into the trim. Add a cornice if desired.
- Clean. Wipe with a damp cloth to remove dust and fingerprints.
5What You'll Need
Materials
- HM-028 PVC ceiling panels
- PVC edge trims (L / U)
- Corner pieces
- Timber battens or metal channels
- Nails, staples or screws
- Cornice (optional)
Tools
- Tape measure & pencil
- Spirit level / string line
- Fine-tooth saw or knife
- Hammer or staple gun
- Drill / screwdriver
- Step ladder
6Where to Use & Care
- Store panels flat, indoors and out of direct sun before fitting.
- Clean with mild soapy water – no abrasive pads or strong solvents.
- Keep panels 150 mm from hot lamps; LED fittings are best.
- A damaged panel can be replaced on its own.
7Frequently Asked Questions
What does "heavy gauge" mean?
Thicker outer walls and stronger internal ribs than standard panels, so it resists sagging, denting and warping.
Is HM-028 waterproof?
Yes. PVC doesn't absorb water, so it's ideal for bathrooms, kitchens, laundries and verandas.
Do I need to paint it?
No. The white factory finish needs no paint – just wipe it clean.
How many panels do I need?
Divide room area by about 1.49 m² and add 5–10%. A 4 m × 3.5 m room (14 m²) needs about 10 panels. Send us your room sizes on WhatsApp and we'll calculate for you.
What batten spacing should I use?
400–600 mm centres. Closer spacing gives a flatter, firmer ceiling.
Do you install?
We are supply-only, but we can share contacts of independent installers.
Where can I buy HM-028 in Nairobi?
At Shabbiri Hardware on Magadi Road – Ongata Rongai (opposite Hashi Petrol Station) and Tuala (past Nazarene University).
Visit Our Branches
Trusted since 1990 · Two branches on Magadi Road
Ongata Rongai Branch
Magadi Road, opposite Hashi Petrol Station
Tuala Branch
Magadi Road, past Nazarene University
Specifications
| Model | HM-028 |
| Category | PVC Ceiling Panels |
| Availability | In stock |
| Sourced by | Shabbiri Hardware Kenya Limited |
Customer reviews
No reviews yet — be the first to review this product.
Frequently bought together
Customers who bought this often add these to their order.



