Loading branch status…
Home / Fiber Cement Boards / Fiber Cement V-Groove Cassiano / Cassia Deco Board 6mm × 1200mm × 2400mm
NEWFiber Cement V-Groove Cassiano / Cassia Deco Board 6mm × 1200mm × 2400mm

Fiber Cement V-Groove Cassiano / Cassia Deco Board 6mm × 1200mm × 2400mm

KSH 3,900/ piece
In stock
About this product
Fiber Cement Boards · V-Groove

A Decorative Grooved Board for Ceilings and Feature Walls

The V-Groove Cassia deco board (also called Cassiano board) is a 6mm fiber cement board with neat V-shaped grooves running along its length. Once fixed and painted, it gives the classic panelled look of timber tongue-and-groove boarding, without the timber.

Each board is a full 8ft × 4ft sheet (1.2m × 2.4m) and covers 2.88 square metres. It is supplied plain grey (uncoloured), ready to paint in any colour.

Because it is cement based, it does not rot, warp or get eaten by termites the way wooden panelling does. Available from Shabbiri Hardware Kenya at our Ongata Rongai and Tuala branches, with delivery arranged across Kenya.

Technical Specifications

ProductFiber cement V-groove deco board (Cassia / Cassiano)
ModelFCVG-CASSIA-6MM
Thickness6mm
Board size1200mm × 2400mm (4ft × 8ft)
Coverage per board2.88 m²
MaterialCement reinforced with fibres
SurfaceDecorative V-grooves on the face, running along the 2400mm length
ColourNatural cement grey (uncoloured)
Finish optionsPaint in any colour
Suitable forCeilings, feature walls, wall panelling, partitions, verandahs and eaves
Selling unitPer piece (one full board)

Key Benefits

  • Panelled look, ready made. The grooves are already formed in the board, so you get a decorative finish without fixing separate strips or battens.
  • The timber look without the timber problems. It does not rot, warp, split or attract termites.
  • Handles moisture. Suitable for verandahs, kitchens, bathrooms and other damp areas.
  • Does not burn. Cement board is non-combustible, a safer choice for ceilings and walls.
  • Paint it any colour. White for a clean ceiling, or a bold colour for a feature wall.
  • Covers fast. One board covers 2.88 m², far quicker than fixing individual planks.
  • Low maintenance. Once painted, it only needs an occasional wipe or repaint.

Best Places to Use It

  • Decorative ceilings in living rooms, bedrooms and lounges
  • Verandah, porch and balcony ceilings
  • Feature walls and wall panelling in homes, hotels, restaurants and offices
  • Reception areas, shops and showrooms
  • Roof eaves and gable ends
  • Partitions where a decorative face is wanted
  • Cottages, lodges and Airbnb units wanting a timber-cabin style
Good to know: If you want a plain flat finish, choose a smooth fiber cement board instead. For floors and heavy-duty walls, use our thicker boards.

How to Install

  1. Plan the groove direction. Decide which way the lines should run. On a ceiling, grooves running along the length of the room make it look longer. On a wall, upright grooves make it look taller.
  2. Prepare the frame. Fix a straight, level timber or steel frame. Supports should be no more than 400mm apart for ceilings and 600mm for walls, with a support behind every board edge.
  3. Measure and mark. Mark your cuts on the board. Where you can, cut so the groove pattern continues evenly from one board to the next.
  4. Cut the board. Score deeply and snap over a straight edge, or use a grinder with a diamond blade. Wear a dust mask and eye protection.
  5. Pre-drill the holes. Drill fixing holes at least 12mm in from the edges and 50mm from the corners to prevent cracking.
  6. Fix the board, grooved face out. Use countersunk fibre cement screws about 200–300mm apart. Do not over-tighten.
  7. Line up the joints. Keep a 2–3mm gap between boards and keep the grooves in line, so the joints blend into the pattern.
  8. Fill and finish. Fill the screw heads, seal the joints with a flexible sealant, then prime with an alkali-resistant primer and apply two coats of paint. Use a brush to work paint into the grooves, then roll the flat faces.
Handling tip: Carry the board on its edge and do not let it bend. Store boards flat, off the ground and under cover until they are fixed.
Please note: We supply the boards only. We do not install, but we can share contacts of independent installers on request.

How Many Boards Do You Need?

One board covers 2.88 m². Use this quick guide, which already includes about 10% extra for cutting:

Area to coverBoards to buy
10 m²4 boards
20 m²8 boards
50 m²20 boards
100 m²39 boards
Example: A verandah ceiling 5m long × 2.4m wide = 12 m². Divide by 2.88 = 4.2 boards. Add 10% = 4.6, so order 5 boards.

Because the grooves must line up, allow a little extra if your room has many corners or cut-outs. Not sure? Send us your measurements on WhatsApp and we will calculate the quantity for you.

Available Options

This page is for the 6mm V-groove Cassia deco board. We also stock:

Primers, paint in any colour, cornices and sealants to finish the job are available at both branches.

Delivery and Collection

  • Collect from our branches. Pick up free of charge from Ongata Rongai or Tuala, both on Magadi Road.
  • Delivery on request. We arrange transport to your site in Nairobi and across Kenya. The delivery charge depends on your location and the number of boards.
  • Transport with care. Boards are 2.4m long, so they must travel flat and fully supported on a pickup or lorry.
  • Easy payment. Pay by M-Pesa Paybill, bank or card.

Frequently Asked Questions

What is a V-groove board?

It is a fiber cement board with V-shaped grooves formed in its face. When fixed and painted, it looks like a row of neat panels or planks.

Is Cassia board the same as Cassiano board?

Yes. Both names are used for this decorative V-groove fiber cement board.

Can I use it for a ceiling?

Yes. It is widely used for decorative ceilings, especially on verandahs and in living rooms.

Can I use it outside?

Yes, on verandah ceilings, eaves and walls on a frame. Seal the joints and cut edges, then prime and paint with exterior paint.

Can I use it in a bathroom or kitchen?

Yes. It does not rot or swell from steam and damp. Prime and paint it with a washable paint.

Which way should the grooves run?

It is your choice. Lengthways lines make a room look longer, and upright lines on a wall make it look taller. Keep the direction the same across the whole surface.

How do I paint the grooves?

After priming, use a brush to work paint into the grooves first, then roll the flat faces. Apply two coats.

How is it different from wooden T&G panelling?

It gives a similar lined look but does not rot, warp or attract termites, and it does not burn.

Do you install?

We supply the boards only. We can share contacts of independent installers on request.

Do you deliver outside Nairobi?

Yes. We arrange delivery countrywide. Send us your location and quantity on WhatsApp for a delivery quote.

Visit or Call Our Branches

Ongata Rongai Branch

Location: Magadi Road, Ongata Rongai, opposite Hashi Petrol Station

Call: 0792 961 751 or 0741 042 484

Open in Google Maps

Tuala Branch

Location: Magadi Road, Tuala, past Nazarene University

Call: 0741 393 113

Open in Google Maps

Online orders and enquiries: WhatsApp 0745 554 008  |  Email shabbirihardware@gmail.com  |  www.shabbirihardware.co.ke
KSH 3,900/ piece
In stock
Delivery on request — same-day within Nairobi, next-day countrywide.
Free pickupat Rongai & Tuala branches.
Qty
1
📲 Order on WhatsApp
100% genuine, sourced materials
Secure M-Pesa & card payment
Countrywide delivery arranged
100% Genuine
No fakes, ever
Quality assured
Trusted brands only
Countrywide delivery
Arranged on request
Expert advice
Sales team on WhatsApp

Specifications

ModelFCVG-CASSIA-6MM
CategoryFiber Cement Boards
AvailabilityIn stock
Sourced byShabbiri Hardware Kenya Limited

Customer reviews

No reviews yet — be the first to review this product.

Frequently bought together

Customers who bought this often add these to their order.